NEWS

Rotec Engineering achieve ‘lights-out’ manufacturing

Rotec Engineering / ETG

Rotec Engineering achieve ‘lights-out’ manufacturing

Aerospace components supplier Rotec Engineering has invested in a Nakamura system to reduce their set-up time and achieve 'lights-out' manufacturing. read...

Moduleworks and GSK announce partnership

Moduleworks

Moduleworks and GSK announce partnership

GSK will use Moduleworks CNC software to improve its performance and deliver cost-effective and efficient machines. read...

Emsens – the embedded vision sensor solution for the control cabinet

EVT

Emsens – the embedded vision sensor solution for the control cabinet

Emsens is a combination of a single board computer like Odroid XU4 or Pine and the Basler dart board level USB 3.0 camera. This embedded vision system has many advantages. It contains all components of the on-board image acquisition including Eyevision image processing software. Emsens is very easy to install in a control cabinet in a DIN rail housing. read...

Metalex Manufacturing Inc. invests in another Starrag machine

Starrag

Metalex Manufacturing Inc. invests in another Starrag machine

The compnay chose to invest in the Droop+Rein T portal by Starrag. This is the companies fourth purchase of a Starrag machine and the largest investment yet. read...

Additive manufacturing at TCT Asia

Renishaw

Additive manufacturing at TCT Asia

At TCT Asia (21 to 23 February 2019), Renishaw will showcase its additive manufacturing technology. This includes both hardware and software. read...

Anca's new website

Anca

Anca's new website

The new website for Anca is customer-oriented. read...

Successful participation for Machine Point

Used Machinery

Successful participation for Machine Point

Interplastica – Used machinery expert Machine Point was indeed happy about the quality of enquiries at its booth at Interplastica in Moscow recently. read...

Five-axis Quaser investment meets requirements, increases sales

Wilson Manufacturing

Five-axis Quaser investment meets requirements, increases sales

UK-based Wilson Manufacturing has installed a Quaser MF400UH 5-axis CNC machine to complement an earlier addition this year of a new mill-turning centre. read...

Intelligent productivity in tool and mould making

GF Machining Solutions

Intelligent productivity in tool and mould making

Rapid market developments and innovations challenge the adaptability of tool and mould making. With its new Mikron Mill P U series of 5-axis simultaneous milling machines, GF Machining Solutions provides these manufacturers with future-proof flexibility. read...

Checkmate: Arburg plays chess at Hanover Fair 2019

Hanover Fair

Checkmate: Arburg plays chess at Hanover Fair 2019

Arburg will be showcasing the production of its vacuum grippers with chess pieces at Hanover Fair 2019. read...

Retrofittable clamping system

Roemheld

Retrofittable clamping system

Roemheld's new clamping system is built for high pressure with an extra-secure locking system to ensure safety. read...

Wilmington pallateer with showcase

Machining Equipment

Wilmington pallateer with showcase

Wilmington Machinery showcases its pallateer before delivery. read...

most frequently read articles

Machine tool industry on course for record year

Germany

Machine tool industry on course for record year

30.11.18 - Even after a weak third quarter, orders and production are set to make 2018 a record-braking year for the machine industry in Germany, VDW announced. read...

Moduleworks and GSK announce partnership

Moduleworks

Moduleworks and GSK announce partnership

01.03.19 - GSK will use Moduleworks CNC software to improve its performance and deliver cost-effective and efficient machines. read...

Record setting parts

NSK/Modig Machine Tool AB

Record setting parts

20.12.18 - The RigiMill high-speed machining centre from Swedish manufacturer Modig holds the world record for high-speed milling. The Y and Z axes of the RigiMill feature twin drives with cooled HMD ball screws from NSK. Axial bearings and roller guide-ways for the axes are also supplied by NSK. read...

More than 10.000 exclusive jobs

Suppliers issues

Cole Carbide Industries Inc.

Millstar Introduces Versatile EIV5 End Mill

Millstar's EIV5 Series is revitalizing conventional practices for the modern machine shop.

Vero Software Limited

Lunch and Learn - Renton, Washington - 15/11/18-15/11/18

Join us at Red Lion Hotel in Renton, Washington on November 15 for our Lunch and Learn event featuring a special software presentation from Cabinet Vision! ...

Renishaw plc

Renishaw promotes productivity at Additive International

To share its knowledge and expertise in metal additive manufacturing as a serialised production technique, ...

THE NEWSLETTER Subscribe to the newsletter.
* I agree to the processing and use of my data according to the declaration of consent.
Spam protection:
Please enter the result of the computation (addition).