-
Markets
Latest Articles in "Markets"
-
Events
Latest Articles in "Events"
-
Components
Latest Articles in "Components"
-
Additive Manufacturing
Latest Articles in "Additive Manufacturing "
-
Machining Equipment
Latest Articles in "Machining Equipment "
-
Software
Latest Articles in "Software"
- Hot Runners
- Cutting Tools
-
EDM
Latest Articles in "EDM"
-
Quality Control
Latest Articles in "Quality Control"
-
Machining Accessories
Latest Articles in "Machining Accessories "
-
Surface Treatment & Repair
Latest Articles in "Surface Treatment & Repair "
-
Materials
Latest Articles in "Materials"
-
Management
Latest Articles in "Management"
- Issue Archive
- Service
-
more...
:quality(80)/p7i.vogel.de/wcms/04/37/0437171a96f83b23ba7c601ac67000a0/0111454509.jpeg "“Overall, we are seeing a decline in the difficulties which our industry has had to contend with,” Dr. Wilfried Schäfer, Executive Director of the VDW says. (Source: Uwe Nölke/ VDW)")
:quality(80)/p7i.vogel.de/wcms/8a/f2/8af24fdc763e684f0843ca2eeb12da9f/0111210654.jpeg "Italian machine took manufacturers recorded a reduction in orders placed by manufacturers in both the foreign and domestic markets. (Source: free licensed)")
:quality(80)/p7i.vogel.de/wcms/78/fe/78feca68f0b24c092c014cf02b670a69/0111072888.jpeg "KPIs for the German tool and die industry. (Source: WZL)")
:quality(80)/p7i.vogel.de/wcms/21/29/2129dc2979b10b8bac08e007eb568f16/0109922951.jpeg "The new Allrounder 470 H saves energy, conserves resources, is production-efficient, user-friendly and reliable. (Source: Arburg)")
:quality(80)/p7i.vogel.de/wcms/78/98/7898f4e4207b9bf66c40331ee46b6b9f/0112111679.jpeg "In the panel discussion “Lightweight Technology Made in EU? – Wishes for European Politics from Research, SME and Large Companies”, representatives from SME, large industry, research institutions and politics talked about how the acceptance and use of composite materials can be promoted. (Source: Composites United e.V.)")
:quality(80)/p7i.vogel.de/wcms/3a/d6/3ad6eb1be88b55918dfc13ed0d452444/0112111665.jpeg "The participants of the BIM panel discussions and the Cadenas BIM experts: Thomas Müller (VDMA e.V.), Ralf Golinski (Build-Ing.), Wolfgang Nagl (Cadenas), Ersin Ibram (Oventrop), Peter Leipold (Kermi), Markus Hettig (Schneider Electric), Karsten Spieß (Cadenas) and Stefan Kaufmann (Allplan). (Source: Cadenas)")
:quality(80)/p7i.vogel.de/wcms/56/21/562129050038d2b68b740c65f489b241/0111804254.jpeg "With more than 55,000 attendees expected, NPE2024 will be the largest plastics event in the Western Hemisphere. (Source: Plastics)")
:quality(80)/p7i.vogel.de/wcms/1b/1f/1b1f06ba03483237afeafe399804ba95/0111744018.jpeg "Technimark was selected in Europe due to their successful utilisation of RJG´s training and integration into their ongoing processes and procedures. (Source: free licensed)")
:quality(80)/p7i.vogel.de/wcms/9c/e5/9ce56d7936991a84513cc4a357e39434/0112111399.jpeg "VBN’s new URQ-HIP will shorten lead times and improve material properties. (Source: VBN)")
:quality(80)/p7i.vogel.de/wcms/2c/ee/2cee219352b8079edc677098cdaa6fe7/0111674824.jpeg "Injection moulds for plastics processing must be temperature-controlled. However, a relatively high number of couplings can cost time during commissioning and can be susceptible to incorrect connections. With the multi-coupling from Meusburger, the issue should now become almost "child's play". (Source: Meusburger)")
:quality(80)/p7i.vogel.de/wcms/37/ca/37ca29d59fdc0f738924b680eb6ad5e2/0111538822.jpeg "The new 3D-printed spiral cores for close-contour core cooling realise an optimised cooling system that shortens cycle times and increases moulding quality. (Source: Strack Norma)")
:quality(80)/p7i.vogel.de/wcms/85/54/8554c7ec7d3be883c9ed6de6c20cb5d9/0111454538.jpeg "The production of bread boxes on the completely electric e-mac 465/180 injection moulding machine from Engel at the Meusburger trade fair stand. (Source: Meusburger)")
:quality(80)/p7i.vogel.de/wcms/0e/37/0e3755a55b7f2fdd60249667ba46e2b1/0111621121.jpeg "Lunovu develops and builds Laser Metal Deposition (LMD) machine systems for industrial applications and research and development, such as this one at Zess. (Source: Lunovu)")
:quality(80)/p7i.vogel.de/wcms/0c/ee/0cee1af6deae7495758918c645d19b3e/0111540362.jpeg "Castor’s software with its proprietary algorithm can automatically select parts that are suitable for 3D printing from CAD drawings. (Source: Castor)")
:quality(80)/p7i.vogel.de/wcms/e4/cf/e4cff21ce3609a37de4c1283ae677a78/0111414862.jpeg "The Massivit 10000-G sets a new standard in industrial mould production by automating and speeding up workflows for composite manufacturing. (Source: Massivit)")
:quality(80)/p7i.vogel.de/wcms/88/ab/88ab38839b37e72e56c92b0490c26230/0111369940.jpeg "According to Impossible Objects, the new 3D printer prints parts fifteen times faster than the nearest competitor. (Source: Impossible Objects)")
:quality(80)/p7i.vogel.de/wcms/70/f4/70f416ea432d7f52054781cd2669165f/0111744752.jpeg "The effective linking of automation, robotics and digitalisation represents an established solution when it comes to optimising process flows in the production environment. (Source: EMO Hannover)")
:quality(80)/p7i.vogel.de/wcms/7b/77/7b7767c0ef4aecffe6e250c8657dcd2d/0111744330.jpeg "Thanks to WFL's own spindle development, the cooling lubricant can be directly fed to the cutting edge through the milling spindle at a pressure measuring up to 200 bar. This ensures rapid, continuous removal of swarf. (Source: WFL)")
:quality(80)/p7i.vogel.de/wcms/22/b3/22b39fb134f2211f3dc7d8ad4d6610d3/0111620279.jpeg "Brass electronic parts being machined in batches up to 15,000-off (Source: Nakamura)")
:quality(80)/p7i.vogel.de/wcms/55/2c/552cc98efaaf22eac3563f22ecf42c4c/0111540382.jpeg "The VCN 530C is a high productivity vertical machining center made at Mazak’s European manufacturing facility in Worcester. (Source: Lee Stanley)")
:quality(80)/p7i.vogel.de/wcms/50/1b/501b2f15a2e1a28a6ba091cb10afc313/0111538555.jpeg "CG Tech will be demonstrating its Vericut Force optimisation module, which reduces machining times by as much as 30-70 percent. (Source: CG Tech)")
:quality(80)/p7i.vogel.de/wcms/d1/2b/d12b7e1e47c75519976e731f70209e72/0111462880.jpeg "Over half of last year’s new apprenticeships at Trumpf’s headquarters in Ditzingen (near Stuttgart) were IT-related. (Source: Trumpf)")
:quality(80)/p7i.vogel.de/wcms/41/3c/413caaa6eb1b3b56e3ba3f3f6e067d5d/0111620626.jpeg "Sodick technology installed at RST Engineering with Vinny Barcock-Jones (Spark Erosion Machinist) (Source: Ian Jamieson Photography)")
:quality(80)/p7i.vogel.de/wcms/5b/a0/5ba03f555179cd370c3f4a303419f916/0110965684.jpeg "Researchers from Berlin are investigating whether tool electrodes made of tungsten carbide-
cobalt can be manufactured additively. (Source: Erowa)")
:quality(80)/p7i.vogel.de/wcms/26/47/2647c43680a5b90a96fa0ae6e3335fa3/0111022097.jpeg "Every day, the EDM team led by Thomas Munkert ensures that the moulds are ready for use at all times. (Source: Sodick)")
:quality(80)/p7i.vogel.de/wcms/73/cd/73cd20e5a12d716cdaa756433a13078b/0110908726.jpeg "Toolmaker Ellis Varnes appreciates the ease of use of the wire EDM machine. (Source: Alpine Tools)")
:quality(80)/p7i.vogel.de/wcms/72/5e/725e1731fa3b7eca83a472bfaa15fce5/0111745423.jpeg "PTC’s Step Check will provide employees with a step-by-step guide through inspection tasks with context-sensitive work instructions. (Source: PTC)")
:quality(80)/p7i.vogel.de/wcms/15/02/1502657757f1abc17c83d6b3a3914e30/0111539841.jpeg "Metrascan 3D is a powerful inspection solution that is insensitive to instabilities and harsh environments. (Source: Creaform)")
:quality(80)/p7i.vogel.de/wcms/d6/3c/d63c7354cb162f1c811d6d73a2e55853/0111539043.jpeg "One of the new Alto aluminium-technology CMMs manufactured by LK Metrology. (Source: LK Metrology)")
:quality(80)/p7i.vogel.de/wcms/d5/65/d565f1318d4d72fb44c1cbad42fb5ddd/0111415372.jpeg "MSC becomes a Renishaw Offical Channel Partner (Source: MSC)")
:quality(80)/p7i.vogel.de/wcms/6d/d0/6dd0a6548cf7c5acbf57c07037a01476/0111341819.jpeg "Vomat demonstrated high-performance ultrafine filtration technology during Grindtec. (Source: Vomat)")
:quality(80)/p7i.vogel.de/wcms/48/8d/488d4b49488b5be8b026f00c9e76628f/0110806962.jpeg "The Vollmer Loroch Twin 860 (Source: Vollmer)")
:quality(80)/p7i.vogel.de/wcms/15/58/1558d09670075700cecc416239df42ec/0110746490.jpeg "The Roemheld RWA 4000 transport cart in use at Jean Müller, Eltville am Rhein, about to pick up a die from the new racking. (Source: Roemheld)")
:quality(80)/p7i.vogel.de/wcms/ec/ff/ecff10cd17b3fbf1bcf1561335805e92/0110597968.jpeg "The Digital Mega Torque Wrench provides a cost-effective alternative to expensive torque measurement machines. (Source: ITC)")
:quality(80)/p7i.vogel.de/wcms/a5/ff/a5ff63c0a214a859d5a58bd889993944/0110142144.jpeg "The Scanner Control Box simplifies and accelerates the integration in a variety of machine concepts. (Source: Bettina Theisinger/ Blackbird Robotics)")
:quality(80)/p7i.vogel.de/wcms/fb/4f/fb4f2ce06db65928d49320855b1fa102/0110039471.jpeg "Titan Tool Supply has expanded its precision micro finishing tool online product catalogue offerings. (Source: Titan Tool Supply)")
:quality(80)/p7i.vogel.de/wcms/e9/0a/e90a68090da7921c0fe6157a8d27eb37/0109495114.jpeg "Pleased with a successfully manufactured load compartment recess made of glass-fibre reinforced polypropylene for the EQS from Mercedes-Benz. From left: Anton Liebl, Siebenwurst project manager, Bernd Hilneder, Oerlikon Hrsflow, and Michael Bilo, Oerlikon Balzers. To the right and behind them, respectively, one of the iridescently coated mould halves for the production of the component can be seen. (Source: Oerlikon Balzers)")
:quality(80)/p7i.vogel.de/wcms/9b/c4/9bc45e8d79b9a711ededad4dfe777e3d/0108870659.jpeg "For the post processing of 3D printed components the Klaus Stöcker metal processing company uses the S1 and M1 Basic from AM Solutions – 3D post processing technology. (Source: Klaus Stöcker Metallbearbeitung)")
:quality(80)/p7i.vogel.de/wcms/90/be/90bea9efec77b1e3dc4c348133623d23/0111744384.jpeg "In the automotive industry, numerous plastics are processed into various components. This is done through the injection moulding process. (Source: © Superstar/Shutterstock.com)")
:quality(80)/p7i.vogel.de/wcms/3c/e8/3ce848bac640e1e88e13f8f70646a0b5/0111538060.jpeg "Section of bus rear end part exterior (Source: Cannon Group)")
:quality(80)/p7i.vogel.de/wcms/59/dc/59dc70ce6e649f94061d9287df5ac6cc/0111370138.jpeg "Cannon short-stroke presses are designed to efficiently produce composite components, such as EV battery casing or enclosures with HP-RTM, SMC, and WCM technology. (Source: Cannon Group)")
:quality(80)/p7i.vogel.de/wcms/31/4a/314add8630906d5c436a9aea65acc66f/0111762065.jpeg "Measurements of power and compressed air leakages reveal energy guzzlers. (Source: Arburg)")
:quality(80)/p7i.vogel.de/wcms/be/50/be502e23b8101487fcda0bacf9dfb4fc/0111744315.jpeg "Gindumac achieves all-time high despite global challenges: Co-CEOs, Benedikt Ruf (left) and Daniel Kaiser (right) (Source: Gindumac)")
:quality(80)/p7i.vogel.de/wcms/f6/48/f6488d9fe616b75fe1f9986f12870e06/0111414888.jpeg "‘Cast Irons – Part 1: Materials and Properties for Design’ provides a comprehensive yet accessible overview of design considerations. (Source: Cast Metals Federation)")
Graphite electrode production: When the robot takes over the night shift
:quality(80)/images.vogel.de/vogelonline/bdb/1871700/1871773/original.jpg "Unmanned 24/7 operation is made possible by the two Exeron HSC600/5 5-axis CNC milling centres that are equipped with an automatic electrode change system through integration in the PCam manufacturing cell. (Hufschmied Zerspanungssysteme )")
