NEWS

Reto Adam is Big Kaiser’s new CEO

Big Kaiser

Reto Adam is Big Kaiser’s new CEO

Big Kaiser has just announced a change at its executive level. Takuya Ichii will make way for Reto Adam. read...

Ultrasound takes cutting to the next level

Intelligent Machining

Ultrasound takes cutting to the next level

The ultrasonic vibration system Perma Vib from Fraunhofer-IWU for drilling and milling tools is primarily intended to perfect the machining of steel and aluminum. read...

Curve segment milling on its way to high-sheen surfaces

Inovatools

Curve segment milling on its way to high-sheen surfaces

The Curvemax series by Inocatools, a series of universal solid carbide curve segment mills in tangential and conical form, shorten the process times required for finishing complex, freeform surfaces in a wide variety of materials. read...

Indexable tools challenge solid carbide for small diameters

Iscar

Indexable tools challenge solid carbide for small diameters

While solid carbide tools represent the traditional tool choice for small diameters, today's indexable tools present several advantages over one-piece solid tools. The manufacturer Iscar offers various indexable insert options for these applications. read...

Attacks cost €43 billion damage

Germany

Attacks cost €43 billion damage

Sabotage, data theft and espionage have caused the German industry a loss of €43.4 billion in the past two years. Seven out of ten industrial companies (68%) were victims of such attacks during this period; one in five companies (19%) suspected this. read...

Mapal: “More visible as a process partner”

Q&A

Mapal: “More visible as a process partner”

E-mobility not only affects automobile manufacturers, but also has an impact on smaller suppliers. Dr. Jochen Kress of Mapal explains what changes a C parts supplier is facing and how the company intends to compensate for potential sales losses. read...

Tool's profile accuracy and complex geometry cut out to be winner

Anca

Tool's profile accuracy and complex geometry cut out to be winner

Australia – Anca has just announced the winner of its first Tool of the Year award at IMTS in Chicago recently. read...

Boeing and Haimer strategic partnership

Haimer

Boeing and Haimer strategic partnership

USA/Germany - The partnership between the Boeing Company and Germany-based Haimer Group has been strategically expanded to a joint membership at the OMIC R&D institution. read...

Radial cutters: With great commitment to success

LMT Tools

Radial cutters: With great commitment to success

The more a cutting edge is tangentially engaged during milling, the faster the machining. LMT Tools has found a solution for radial cutters that ensures significantly shorter throughput times and better surface quality. What exactly is behind the increase in performance and where are radial cutters used? read...

21 Product Highlights at AMB 2018

AMB

21 Product Highlights at AMB 2018

Whether you are looking for machining equipment or undexable inserts: at the many booths of AMB you will probably find what you are looking for. read...

Tomorrow's trends on show at the special shows of AMB

AMB 2018

Tomorrow's trends on show at the special shows of AMB

Nowadays, many trade fairs offer a wide range of additional programmes. The AMB, too, of course. The history of the development of a racing car, the latest innovations in machining and concrete optimisation through digitisation – these are the subjects of this year's special AMB shows. read...

most frequently read articles

Mapal: “More visible as a process partner”

Q&A

Mapal: “More visible as a process partner”

12.10.18 - E-mobility not only affects automobile manufacturers, but also has an impact on smaller suppliers. Dr. Jochen Kress of Mapal explains what changes a C parts supplier is facing and how the company intends to compensate for potential sales losses. read...

Creating a new cutting tool – From concept to spindle

Product development

Creating a new cutting tool – From concept to spindle

20.10.18 - New cutting tools are continuously being introduced to the market, but what is the process needed to develop a product from concept through to the spindle? Global company Dormer Pramet tasks its product management and development department with creating new tools every year. read...

Curve segment milling on its way to high-sheen surfaces

Inovatools

Curve segment milling on its way to high-sheen surfaces

30.11.18 - The Curvemax series by Inocatools, a series of universal solid carbide curve segment mills in tangential and conical form, shorten the process times required for finishing complex, freeform surfaces in a wide variety of materials. read...

More than 10.000 exclusive jobs

Suppliers issues

Cole Carbide Industries Inc.

Millstar Introduces Versatile EIV5 End Mill

Millstar's EIV5 Series is revitalizing conventional practices for the modern machine shop.

Vero Software Limited

Lunch and Learn - Renton, Washington - 15/11/18-15/11/18

Join us at Red Lion Hotel in Renton, Washington on November 15 for our Lunch and Learn event featuring a special software presentation from Cabinet Vision! ...

Renishaw plc

Renishaw promotes productivity at Additive International

To share its knowledge and expertise in metal additive manufacturing as a serialised production technique, ...

THE NEWSLETTER Subscribe to the newsletter.
* I agree to the processing and use of my data according to the declaration of consent.
Spam protection:
Please enter the result of the computation (addition).