Sintered chip breaker geometries are a key feature of the cutting tools Horn will present at Southern Manufacturing & Electronics 2027. The company's latest indexable inserts for parting-off, grooving and internal turning are designed to improve chip control and machining stability while reducing manufacturing costs.
Horn Supermini boring tools with GM chip-breaker topology pressed into the green insert blank before sintering.
(Source: Horn Cutting Tools)
The Horn Cutting Tools stand at Southern Manufacturing & Electronics 2027 (A205) will centre on a lineup of its latest high-performance indexable-insert tooling innovations, led by the S234 parting-off products and the S66T grooving systems, alongside the Mini and Supermini tool ranges.
All inserts feature chip breaker geometry pressed accurately, repeatably and economically into each green blank before it is sintered. It saves the expense of having to laser-cut or grind the geometry into the insert after it has been hardened. Until now, this has been the industry norm when manufacturing miniature inserts due to the difficulty in pressing small chip breaker forms without them losing precision when heated at up to 1,500°C in a furnace.
Gallery
Indexable-insert tool for parting-off
The S234 system was developed by Horn especially for large parting depths. The double-edged system enables a maximum depth of cut of 33 mm for reliable, economical parting off. The combination of large grooving depths, rigid clamping, high-performance sintered EN chip breaking geometry and internal cooling makes the system attractive in terms of price and performance.
The inserts are available in cutting widths of 2 mm or 3 mm and the corner radii are 0.2 mm and 0.3 mm respectively. Depending on the material to be machined, they are available in AS65 and IG65 grades. Square shank holders in sizes 20 mm x 20 mm and 25 mm x 25 mm ensure stable clamping and they are equipped with internal coolant supply.
Six-edged radial grooving inserts
With the latest S66T grooving system, Horn has expanded its cutting tool portfolio in the area of six-edged indexable inserts, which offer a competitive price per cutting edge. Maximum grooving depth is 9.5 mm, which is about 4 mm more than is possible with the sister system, 64T. Cutting width is either 2.5 mm or 3 mm and the corner radius is 0.2 mm.
Depending on the application, to ensure reliable chip management Horn offers the neutral grooving inserts with a choice of two chip breaker geometries, 1A for groove turning operations only, or DL for longitudinal turning as well as grooving. There is a further version without geometry for maximum edge strength. The IG65 carbide grade is used for machining stainless steels and difficult-to-cut materials, while for general steels Horn recommends the EG55 carbide grade. For the former operation, the inserts are available with a corner radius of 0.4 mm.
The variants with chip breaker geometry ensure excellent surface quality on the groove flanks and the straight main cutting edge produces a cleanly finished base. They can be clamped in square shanks, with internal coolant delivery to either the left- or right-hand side.
Sintered inserts for the Mini system
Horn has also developed sintered chip breaker inserts for its Mini tool system. Featured on the stand will be Mini types 108, 111 and 114. Their sintered I-Geometry is particularly aimed at machining materials with poor chip formation properties. It is suitable for copy turning, longitudinal turning, back turning and facing. Especially with shallow depths of cut in steel and stainless steels, the tool system with this geometry demonstrates effective chip control. It leads to higher process stability and longer tool life.
When developing the I-geometry, Horn took into account the machining of lead-free materials. As these will pose a challenge in the future due to their inferior chip formation, the tool manufacturer offers inserts with small corner radii starting from 0.05 mm for small lateral infeeds.
The face-mounted, screw-on, Mini-type inserts are among Horn's core products. The tool system is suitable for turning and milling applications. The precision tools have proven particularly effective for internal turning and grooving. With the low-vibration, solid carbide tool holders, the inserts produce good surface finishes even with long overhangs and ensure high process reliability.
Economical boring tools
Horn’s Supermini universal boring system has undergone numerous development stages over the years and has solved problems in a variety of turning applications. Another milestone has been announced for the Supermini type 105, namely a lower cost version of the carbide inserts with sintered chip breaking geometry, called GM (geometry moulded), with a price similar to that of the standard insert without a chip breaker.
Date: 08.12.2025
Naturally, we always handle your personal data responsibly. Any personal data we receive from you is processed in accordance with applicable data protection legislation. For detailed information please see our privacy policy.
Consent to the use of data for promotional purposes
I hereby consent to Vogel Communications Group GmbH & Co. KG, Max-Planck-Str. 7-9, 97082 Würzburg including any affiliated companies according to §§ 15 et seq. AktG (hereafter: Vogel Communications Group) using my e-mail address to send editorial newsletters. A list of all affiliated companies can be found here
Newsletter content may include all products and services of any companies mentioned above, including for example specialist journals and books, events and fairs as well as event-related products and services, print and digital media offers and services such as additional (editorial) newsletters, raffles, lead campaigns, market research both online and offline, specialist webportals and e-learning offers. In case my personal telephone number has also been collected, it may be used for offers of aforementioned products, for services of the companies mentioned above, and market research purposes.
Additionally, my consent also includes the processing of my email address and telephone number for data matching for marketing purposes with select advertising partners such as LinkedIn, Google, and Meta. For this, Vogel Communications Group may transmit said data in hashed form to the advertising partners who then use said data to determine whether I am also a member of the mentioned advertising partner portals. Vogel Communications Group uses this feature for the purposes of re-targeting (up-selling, cross-selling, and customer loyalty), generating so-called look-alike audiences for acquisition of new customers, and as basis for exclusion for on-going advertising campaigns. Further information can be found in section “data matching for marketing purposes”.
In case I access protected data on Internet portals of Vogel Communications Group including any affiliated companies according to §§ 15 et seq. AktG, I need to provide further data in order to register for the access to such content. In return for this free access to editorial content, my data may be used in accordance with this consent for the purposes stated here. This does not apply to data matching for marketing purposes.
Right of revocation
I understand that I can revoke my consent at will. My revocation does not change the lawfulness of data processing that was conducted based on my consent leading up to my revocation. One option to declare my revocation is to use the contact form found at https://contact.vogel.de. In case I no longer wish to receive certain newsletters, I have subscribed to, I can also click on the unsubscribe link included at the end of a newsletter. Further information regarding my right of revocation and the implementation of it as well as the consequences of my revocation can be found in the data protection declaration, section editorial newsletter.
The inserts assist internal machining of small diameter holes, whether profile turning, internal grooving, threading, chamfering, face grooving or slot broaching. Horn developed teardrop shaped carbide blanks for the tool, enabling large, precise contact surfaces in the tool holder and resulting in greater rigidity of the overall system. Furthermore, the teardrop profile prevents the insert from twisting, which leads to consistent, precise positioning of the centre height of the tool. When using long tool overhangs, it reduces deflection and minimises vibration during turning.
Horn offers the inserts as standard in three lengths (15.0 mm, 20.0 mm and 25.0 mm) and in carbide grades TH35 and IG35. The tool is suitable for use from a bore diameter of 6 mm. The cutting edge geometry extends far into the 0.2 mm corner radius of the insert, ensuring good chip control even with small infeed settings. Different material groups may be processed and the geometry is suitable for internal, face, copy and back turning.
The new insert is compatible with numerous 105 tool holders, including round shank, square shank, interface and adjustable types. There are four different solutions for clamping the inserts: a classic ball pressure screw, a face clamping element, a lifting element, and for confined spaces, a compact system with clamping via a union nut. In addition, Horn's applications department solves users' specific machining problems with customised solutions.