NEWS

Hot runners with uncooled cylinder

MEX / HRS Flow

Hot runners with uncooled cylinder

HRS cool is a solution for hot runner injection moulding, enabling the otherwise necessary water cooling of the corresponding actuator to be dispensed with. read...

Hot and cold runner solutions

MEX / Hot Runners

Hot and cold runner solutions

Highlights at Ewikon’s booth will include a range of hot runner solutions focussing on multi-cavity applications and its new cold runner system that allows the efficient processing of liquid silicone rubber (LSR). read...

High-end hot runner technology provides effective family moulding for automotive engineering

Synventive

High-end hot runner technology provides effective family moulding for automotive engineering

Dynamics, reliability, and comfort in automotive engineering relate not only to driving performance but also the visual and physical experience the vehicle emits. Recent advancements in the technological manufacturing processes allow for continual improvements to this experience. read...

Refining proven HPP platform for more reliability and quality

Husky Injection Molding Systems

Refining proven HPP platform for more reliability and quality

Canada-based Husky Injection Molding Systems recently announced the launch of its next-generation Hypet HPP5e system. read...

Jones appointed President of APPT Americas and Europe businesses

Milacron

Jones appointed President of APPT Americas and Europe businesses

USA - Milacron has announced that Mac Jones has been promoted and is now President of Milacron Advanced Plastics Processing Technologies (APPT) Americas and Europe businesses. read...

Flexflow hot runner technology by HRS flow for family mould

HRS flow

Flexflow hot runner technology by HRS flow for family mould

HRS flow presents a new family mould for one-shot production of three high-quality visible parts for a door module for car interiors. The use of the Flexflow technology ensures finely grained surfaces without pressure lines or flow marks. read...

End-to-end manufacturing execution process

Husky

End-to-end manufacturing execution process

Husky presented an operating model at EMEA event. The focus of the event was on digitalisation and the future of the industry. read...

Micromoulding for catheters

Hot Runners

Micromoulding for catheters

Flexan produces micromoulded catherters and other medical equipment. The challenges and benefits of this moulding technique are covered here. read...

Plastic processing in digitalisation mode at Fakuma 2018

Fakuma 2018

Plastic processing in digitalisation mode at Fakuma 2018

P. E. Schall, organiser of Fakuma, was pleased once more last year with the great demand for the trade show in the field of plastics technology: 1933 market and technology leaders from 40 countries presented their companies to 47,650 expert visitors from all over the world. read...

Compact precision gating in tight spaces

Incoe

Compact precision gating in tight spaces

Very slim and compact, and able to be screwed close together into the manifold – these are the key points from the product profile of the new Slim DF 8 nozzles, which hot runner manufacturer Incoe has presented in 2018. read...

Milacron's Q3 overview reflects a solid quarter

Milacron

Milacron's Q3 overview reflects a solid quarter

Global industrial technology company Milacron has just announced its financial results for the third quarter, which ended 30 September 2018. read...

Günther invests in a successful future

Special Report

Günther invests in a successful future

Günther Hot Runner Technology has plenty of reasons to celebrate. Firstly, the company has been founded exactly 35 years ago. Secondly, the expansion and renovation of the company's headquarters in Frankenberg, Germany, have been completed. read...

most frequently read articles

High-end hot runner technology provides effective family moulding for automotive engineering

Synventive

High-end hot runner technology provides effective family moulding for automotive engineering

17.04.19 - Dynamics, reliability, and comfort in automotive engineering relate not only to driving performance but also the visual and physical experience the vehicle emits. Recent advancements in the technological manufacturing processes allow for continual improvements to this experience. read...

Flexflow hot runner technology by HRS flow for family mould

HRS flow

Flexflow hot runner technology by HRS flow for family mould

20.03.19 - HRS flow presents a new family mould for one-shot production of three high-quality visible parts for a door module for car interiors. The use of the Flexflow technology ensures finely grained surfaces without pressure lines or flow marks. read...

End-to-end manufacturing execution process

Husky

End-to-end manufacturing execution process

14.02.19 - Husky presented an operating model at EMEA event. The focus of the event was on digitalisation and the future of the industry. read...

More than 10.000 exclusive jobs

Suppliers issues

DIPROFIL Diamantprodukter AB

The new DIPROFIL website is now online!

We are happy to announce that our new website in now online!

Cole Carbide Industries Inc.

Millstar Introduces Versatile EIV5 End Mill

Millstar's EIV5 Series is revitalizing conventional practices for the modern machine shop.

Vero Software Limited

Lunch and Learn - Renton, Washington - 15/11/18-15/11/18

Join us at Red Lion Hotel in Renton, Washington on November 15 for our Lunch and Learn event featuring a special software presentation from Cabinet Vision! ...

THE NEWSLETTER Subscribe to the newsletter.
* I agree to the processing and use of my data according to the declaration of consent.
Spam protection:
Please enter the result of the computation (addition).