MEX/ DP Technology

Increasing productivity with patent- pending milling strategy

| Editor: Briggette Jaya

The Profit Milling strategy for 2, 3, 4 and 5-axis roughing cycles removes more material faster.
The Profit Milling strategy for 2, 3, 4 and 5-axis roughing cycles removes more material faster. (Source: DP Technology)

At MEX, experts at the DP Technology booth will demonstrate features of the company's Esprit CAM software.

One highlight at theDP Technolgy booth is the Esprit Knowledge Base. This software enables the programmer or operator to determine the best method to machine a part or feature by automatically selecting the most appropriate machining cycle, cutting tool and machining parameters with the push of a button. The multi-user SQL database built in Knowledge Base closes the loop between CNC programmers and the shop floor by providing a central repository for accumulating shop-wide machining experiences, the company notes.

Today, manufacturers are intensely competitive and are constantly looking for new ways to produce quality parts in shorter periods at lower costs. Esprit’s high-speed cycles are said to increase productivity.

According to DP Technology, Esprit’s new, patent-pending Profit Milling Strategy for 2, 3, 4 and 5-axis roughing cycles enables users to remove more material more quickly. It optimises engagement angle, chip load, lateral cutter force and machine acceleration to achieve optimal results. As such the Profit Milling cycle reduces machine-tool cycle time, increases tool life, decreases programing time, reduces energy consumption and significant improves productivity - even with light and medium-duty machine tools. The company claims that test results have shown that Profit Milling typically reduces cycle time by 75% compared to a traditional concentric roughing strategy.

A more advanced, productive and safe cutting method for high-speed roughing is Profit Turning. This new technology is based on engaging control strategy and tool selection, which helps eliminate adverse effects resulting from traditional turning methods, thereby increasing productivity, DP Technolgy says.

At MEX, DP Technology will be in Hall 3, Booth D60.

Interface standard will simplify digitalisation considerably

Software

Interface standard will simplify digitalisation considerably

01/04/2019 - First concrete OPC UA Companion Specification based on a realistic set of parameters was presented at EMO Hannover 2019. Global networking as envisaged by Industry 4.0 will only succeed if the data exchange takes place via standardised interfaces over the entire process chain. read...

Comments are being loaded ....

Leave a comment

The comment is checked by an editor and will be released soon.

Discuss anonymously or log in Log In

Avatar
To protect our interests, we store the IP address in addition to the above information. This is solely for the purpose of identifying you as the author of the comment. The legal basis is the protection of legitimate interests in accordance with Art. 6 para. 1 lit. f) DSGVO.
  1. Avatar
    Avatar
    Edited by at
    Edited by at
    1. Avatar
      Avatar
      Edited by at
      Edited by at

Comments are being loaded ....

Report comment

Kommentar Freigeben

Der untenstehende Text wird an den Kommentator gesendet, falls dieser eine Email-hinterlegt hat.

Freigabe entfernen

Der untenstehende Text wird an den Kommentator gesendet, falls dieser eine Email-hinterlegt hat.

copyright

This article is protected by copyright. You want to use it for your own purpose? Infos can be found under www.mycontentfactory.de (ID: 45838827 / Software)