Machining Equipment

New Taurus machining centre

| Editor: Steffen Donath

The new model is set to release in 2020.
The new model is set to release in 2020. (Source: Kingsbury)

Waldrich Cobrug announced a new model in the Taurus range to be released in 2020. The focus of the new machine is die and mould production.

Since German machine tool manufacturer Waldrich Coburg introduced its first series-produced (as opposed to bespoke manufactured) machining centre in two sizes nearly four years ago, 30 of the Taurus machines have been sold internationally. They were described as small, portal-type machining centres, but with axis travels of 5,000 x 3,500 x 1,500 mm and 6,000 x 4,000 x 1,500 mm plus a 2,000 mm W-axis, they are large by most standards. Now the manufacturer, which is represented in the UK, Ireland and Middle East by Kingsbury, has announced that it will add new a model to the range in 2020.

The Taurus 30 Gemini, an alternative version of the larger of the two existing machines, will combine the superior structural stability for which Waldrich Coburg is renowned with higher speed machining to satisfy users looking for elevated levels of productivity as well as good surface finish and high accuracy. The machine is well suited to die and mould production and is capable of both roughing at up to 63 kW / 1,500 Nm and dynamic high-speed finishing at up to 20,000 rpm. A notable feature of the design is vibration-damping, wear-free, hydrostatic guideways in all axes.

Machine builders are pioneers in Virtual Reality

Software

Machine builders are pioneers in Virtual Reality

03/12/2019 - More than one in three companies (34 %) in mechanical and plant engineering use augmented reality (AR) and virtual reality (VR) — twice as many as a year ago (17 %). read...

Comments are being loaded ....

Leave a comment

The comment is checked by an editor and will be released soon.

Discuss anonymously or log in Log In

Avatar
To protect our interests, we store the IP address in addition to the above information. This is solely for the purpose of identifying you as the author of the comment. The legal basis is the protection of legitimate interests in accordance with Art. 6 para. 1 lit. f) DSGVO.
  1. Avatar
    Avatar
    Edited by at
    Edited by at
    1. Avatar
      Avatar
      Edited by at
      Edited by at

Comments are being loaded ....

Report comment

Kommentar Freigeben

Der untenstehende Text wird an den Kommentator gesendet, falls dieser eine Email-hinterlegt hat.

Freigabe entfernen

Der untenstehende Text wird an den Kommentator gesendet, falls dieser eine Email-hinterlegt hat.

copyright

This article is protected by copyright. You want to use it for your own purpose? Contact us via: support.vogel.de/ (ID: 46275257 / Machining Equipment )