Used Machines
  • Newsletter
  • Whitepaper
  • Webinars
Mobile-Menu
Used Machines
  • Newsletter
  • Whitepaper
  • Webinars
  • Markets
  • Events
  • Components
  • Additive Manufacturing
  • Machining Equipment
  • Software
  • Hot Runners
  • Cutting Tools
  • EDM
  • Quality Control
  • Machining Accessories
  • Surface Treatment & Repair
  • Materials
  • Issue Archive
  • Service
    • Galleries
    • Suppliers
Logo Logo
  • Markets

    Latest Articles in "Markets"

    Plastpol will once again be the meeting place for the plastics processing industry in Central and Eastern Europe.

    Plastpol Expo

    Everything about moulding machines, extruders and granulates

    The all-electric e-motion combines high performance with very low energy consumption.

    Plastpol

    Intelligent processes for improved efficiency and sustainability

    The hybrid Allrounder 520 H produces 32 pipettes in a cycle time of around six seconds at Plastpol.

    Plastpol

    Focus on digitalisation and automation

    Boy will present two completely different injection moulding machines at Plastpol.

    Plastpol

    Injection moulding machines: Different concepts for varying demands

  • Events

    Latest Articles in "Events"

    The international trade fair for manufacturing technology Metav, returns after a four-year break.

    Metav 2022

    International trade fair for manufacturing technology returns after a four-year break

    On October 15th, the first site-planning phase for AMB 2022 began.

    Metal Cutting Technology

    AMB: Meeting place for mechanical engineering prepares for full house

    Dr. Wilfried Schäfer, Executive Director of GrindingHub organizer VDW (German Machine Tool Builders' Association), is more than pleased with the figures.

    Grinding Hub 2022

    Grinding technology trade fair is fully booked

    The industry gathers at the MEX Meeting Point.

    Trade Fair for Tool, Pattern and Mould Making

    MEX Meeting Point: Kicking off Moulding Expo 2023

  • Components

    Latest Articles in "Components"

    High-quality materials make the quick-release couplings robust against vibrations and movements.

    Mould Components

    Clean break cooling range

    In the production of front caps made of LCP, direct gating of the new hot runner system from Günther, results in material savings of approx. 40 percent.

    Conserving resources

    How innovative hot runner technology uses material more efficiently

    Hasco's development department has remained busy over the last few months. The six innovations presented here include, for example, the Basezone control unit series, which features simple operation and precision. Find out what else is new.

    Plastics processing

    Hasco’s standard mould innovations for tool and mould makers

    The new product configurator by brandgroup effectively reduces the high complexity of designing and planning arc springs.

    Components

    New 3D CAD configurator for arc springs

  • Additive Manufacturing

    Latest Articles in "Additive Manufacturing "

    A new material network is set to creat a solution to provide AM customers with industrial grade material systems.

    AM Materials

    Network wants to advance industrial 3D printed parts production

    Shoe prototype printed using Agilus 30 materials for full color and flexibility.

    3D Printing Materials

    Stratasys introduced three new colour resin materials for realistic soft-touch prints

    The first life cycle assessment of an Additive Manufacturing Powder Process has been completed by Foresight Management for 6K Additive.

    Sustainable Production

    First life cycle assessment of AM powder process completed

    The combination of two additive manufacturing technologies reduces downtimes at Procter & Gamble.

    AM strategy

    Procter & Gamble cleverly combines additive and subtractive technologies

  • Machining Equipment

    Latest Articles in "Machining Equipment "

    Chairman of the Executive Board Christian Thönes: “We had an excellent start to the year and even achieved new record figures for order intake, Ebit, Ebit margin and free cash flow in the 1st quarter.”

    Forecast Confirmed

    DMG Mori reports record figures in first quarter 2022

    The Trufiber S’s beam delivery system has one or two outputs. The latter delivers laser light to two systems.

    Laser Technology

    Trumpf unveils new lines of fiber lasers for demanding welding and cutting use

    Schaeffler has opened its new tool technology centre in Höchstadt. Highlights include several automated robot lines (pictured) and time-saving support for developers. Here, stamping and forming tools, are the manufacturing focus.

    Tool Technology

    Schaeffler expands with new tool technology centre

    Guideways for the slide of the 64-compartment tool are cleanly finished with the Mapal Optimill-Hardened-Finish.

    Optimisation in mould making

    Flexibility and productivity with solid carbide tools

  • Software

    Latest Articles in "Software"

    Automated operator reporting takes away the need to fill in paper reports and produces results in real time, allowing any necessary corrective action to be taken immediately.

    Digital Transformation

    Business digitalisation for metal manufacturers in 5 easy steps

    Module Works announces the creation of three new senior positions as well as the successor to Heiko Weber, former Head of Digital Manufacturing.

    Three Dedicated Business Areas

    Module Works appoints new Business Heads

    The Module Works Insider Conference was one of the first events that gathered experts from the CAD/CAM industry and brought them together to exchange knowledge and ideas.

    MIC 2022

    Module Works to re-connect the CAD/CAM Industry

    Companies using the new version of Halcon machine vision software benefit from more efficient production.

    Machine Vision

    MV Tec expands deep-learning-based anomaly detection in Halcon 22.05

  • Hot Runners

    Latest Articles in "Hot Runners"

    One version of the HPS III-MH111 integrates all main nozzles including the complete wiring into a separate nozzle retainer plate.

    New Nozzle Concept

    Hot runner systems: Optimised for syringe and pipette production

    Hasco introduces a new controller cart for hot runner control units.

    Helpful Accessories

    Controller cart keeps hot runner control units handy

    Mold-Masters is proud to announce a significant enhancement to our Advanced Plastic Leak Detection capabilities found on our Temp Master hot runner temperature controllers.

    Temperature Control

    Mold-Masters introduces manifold leak detection technology

    Arburg has been using Hasco’s standardised components for many years.

    Injection Moulding

    How standardised components ensure optimum injection moulding results

  • Cutting Tools
  • EDM

    Latest Articles in "EDM"

    Paul Hitchcock, Innovations Manager at Peco, is happy with the investment in the Sodick ALC400G ‘i Groove edition’ wire-erosion machine.

    Wire EDM

    Model railway manufacturer fast-tracks another EDM machine

    Cheap graphite electrodes from China have been flooding the market.

    EDM

    EU counters dumped imports of graphite electrodes from China

    ECP

    This is how Electrochemical Polishing ensures smooth mould surfaces

    The quality characteristics of the G5 Precision meet the requirements for high precision in multi-cavity moulds and high-quality surfaces.

    EDM

    High precision leads to new fields of economical applications

  • Quality Control

    Latest Articles in "Quality Control"

    SWA39 Surf is a comprehensive fixating programme for surface and contour measurements.

    Control 2022

    Innovations in clamping technology for the metrology sector

    Precision motion control and automation specialist Aerotech has launched the 2nd generation of its ANT nanopositioning stages.

    Measurement Equipment

    Aerotech launches new ANT nanopositioning stages

    Featuring an accuracy to ±0.7μm, the LM Series combines the ease of use associated with the Keyence range with the breakthrough precision demanded across an ever broader range of applications.

    Metrology

    Measurement system now with even higher accuracy

    Aerotech presents its new release of the user-friendly control platform Automation1 at the trade fair.

    Laser — World of Photonics

    Laser scan systems make debut at Munich trade fair

  • Machining Accessories

    Latest Articles in "Machining Accessories "

    Multistation and French master reseller of the manufacturer Meltio, have just welcomed Axiome for the integration of Meltio Engine heads on robots.

    Automation Solutions

    Industrial Robots: Multistation signs agreement with Axiome Robotic Solutions

    Diebold has developed the MS 3.0. micro shrinking unit primarily for small-diameter milling cutters and their tool holders.

    Metav

    Heat protection for sensitive shrink chucks

    Comparison of power consumption: Marc Reis, Technical Manager Datron Tech Academy, proved in a Youtube video that a Datron neo milling machine consumes less power than a standard hair dryer.

    Machine development

    Energy efficient machines as a competitive advantage

    Back-turning demands high-performance damped tools in internal turning operations.

    Dampening Tools

    Internal back-turning: a new possibility to increase productivity

  • Surface Treatment & Repair

    Latest Articles in "Surface Treatment & Repair "

    Work Finisher Tools feature a ceramic blade ideal for deburring and deflashing hard plastics while eliminating the fear of cutting your hands, fingers or damaging the moulded part in the process

    Surface Finishing

    Safe and easy deburring and deflashing with new ceramic tools

    Sprue cutters, pliers, side cutters, hand tools and many useful items for workshop needs now complete the range of HSB Normalien.

    Useful Tools

    New products for workshop equipment

    The laser cleaning process is completed in a few seconds.

    Surface Cleaning

    Compact and effective laser cleaning of workpieces

    The investment of Precision Micro comprised £5.1 million.

    Chemical Etching

    Precision Micro unveils major investment following 2019 fire

  • Materials

    Latest Articles in "Materials"

    737 recycled carbon sidewall prototype.

    Cannon Ergos collaborates with Boeing

    Thermoplastic composite aircraft sidewall panels made of recycled carbon fibre

    Vedanta Aluminium launches Restora low carbon green aluminium.

    Green materials

    Vedanta launches first low carbon aluminium from India

    Preserving value through circular economy. On Ash Wednesday, the German Plastics Processing Association (GKV) again took stock of how the German plastics processing industry is doing and where the problems lie. Here are the most important facts.

    Plastics industry

    Plastics processors report sales growth beset by uncertainties

    Fully automated injection moulding cell around a hybrid Allrounder 720 H in packaging version.

    Injection Moulding Cell

    Collaborative project: New approach to the production of thin-walled packaging

  • Issue Archive
  • Service
    • Galleries
    • Suppliers
  • more...
Login

Whitepaper

Whitepaper Cover: SLM
Market Study

The Current Status of Industrial 3D Printing

We made the reality check and asked 560 users from different industries. The evaluation of the results confirmed our theses, but also surprised us. We have summarized all results in a white paper for you.

Whitepaper Cover: Vogel Communocations Group
AI in the industry

ETMM Dossier – Artificial Intelligence

Artificial Intelligence, or AI, is on the rise. But where to start? How to tackle the first AI project? And how will this technology shape the industry? Find out in our new dossier.

Whitepaper Cover: Mastercam
Six-step program for increasing manufacturing output

Six step action plan to boost your manufacturing business

This white paper presents a repeatable action plan to help machine shops evaluate and improve their manufacturing business while making sure their CAD/CAM software and machine tools are as efficient as possible.

Whitepaper Cover: CNC Software Inc.
CAM software

Meeting the challenge: Changes in aerospace manufacturing

The aerospace industry is subject to constant changes and developments. Advanced CAM software plays a crucial role in production efficiency and meeting requirements.

company profile

Heun Funkenerosion GmbH
Heun Funkenerosion GmbH
Jongen Werkzeugtechnik GmbH
Jongen Werkzeugtechnik GmbH
BORIDE Engineered Abrasives
BORIDE Engineered Abrasives
ETMM European Tool & Mould Making
ETMM European Tool & Mould Making
HASCO Hasenclever GmbH + Co KG
HASCO Hasenclever GmbH + Co KG
Meusburger Georg GmbH & Co. KG
Meusburger Georg GmbH & Co. KG
AMETEK GmbH Division Creaform Deutschland
AMETEK GmbH Division Creaform Deutschland
Renishaw plc
Renishaw plc
DIPROFIL Diamantprodukter AB
DIPROFIL Diamantprodukter AB

Webinars

An In-Depth Look at Color Change Performance
New Hot Runner technology to optimize color change procedure

An In-Depth Look at Color Change Performance

Using System & Hot Runner Balance in the Mold Qualification
Sharing Hot Runner System Balance Knowledge by Video

Using System & Hot Runner Balance in the Mold Qualification

Introducing Integrated Medical Injection Moulding Systems
Expert Session: Medical Plasticware Manufacturing

Introducing Integrated Medical Injection Moulding Systems

Galleries

Iscar’s Multi-Master family of assembled tools with exchangeable cutting heads helps to overcome challenging tasks. With its rich variety of heads, shanks, reducers and extensions, it enables over 40,000 possible tool configurations.

Product highlights March 2019

Numbers of the month: November

To produce high-quality components in selective laser melting (SLM), a stable, inert gas atmosphere in the building chamber of the machine and a specified temperature range are essential. It is also necessary to remove metal splash and smoke developing during the melting process. Gebr. Becker will present two blower types developed for such applications at Formnext 2018.

Product highlights November 2018

FOLLOW US ON:

Cookie-Manager Imprint About Media Privacy General Terms and Conditions Help

Vogel Logo

Copyright © 2022 Vogel Communications Group

This portal is a brand of Vogel Communications Group. You will find our complete range of products and services on www.vogel.com

Husky ; Husky Injection; SLM; Vogel Communocations Group; Mastercam; CNC Software Inc.; ETMM; Ametek GmbH Division Creaform Deutschland; Iscar; Pixabay; Gebr. Becker; Plastpol; Engel; Arburg; Boy; Metav; Landesmesse Stuttgart; Uwe Nölke/ VDW; Uli Regenscheit/ Landesmesse Stuttgart; Hasco; Günther; Brandgroup; Public Domain; Stratasys; 6K Additive; Trumpf; DMG Mori; Schaeffler; Mapal; Lantek; Module Works; MV Tec; Ewikon; Christian Schörg/ Hasco; Mold-Masters; Nick Matthews; PMM; Procter + Gamble; DK Fixiersysteme; Aerotech; Keyence; Multistation; Diebold; Datron; MAQ; Boride; HSB Normalien; Emag; Precision Micro; Cannon Group; Business Wire; Polymerfan; Christophe Brissiaud , Collomb Mécanique