Welding

Fixing casting and surface defects

| Editor: Alexander Stark

The two-component reaction resin system Ultrametal can be used to repair metal parts made of aluminum, bronze, steel and iron.
The two-component reaction resin system Ultrametal can be used to repair metal parts made of aluminum, bronze, steel and iron. (Source: Diamant Metallplastic)

Diamant Metallplastic has further improved its two-component reaction resin system "Ultrametal" for cold welding. It is designed to make it even easier to fix casting and surface defects on metals with all the advantages of cold chemical welding.

The two-component reaction resin system Ultrametal can be used to repair metal parts made of aluminum, bronze, steel and iron.

For each of these metals, the German specialist for coating and polymer systems Diamant Metallplastic offers a suitable two-component reaction resin system with metal finish in their product range. The system is available as a pasty or liquid application variant.

Up to now, a suitable hardener for each metal character had to be used when Ultrametal was applied. A total of 16 different components were available for the four types of metals and in both pasty and liquid variants: Eight resins and eight hardeners — each with different mixing ratios.

Rapid casting for shorter delivery times of prototypes

3D Printing with Sand

Rapid casting for shorter delivery times of prototypes

05/15/2018 - By printing prototypes in 3D with sand, a foundry reduces delivery times from about two months to around ten working days - by a process called rapid casting. read...

One Hardener for All Types of Metals

According to the company, it has now succeeded in developing a universal hardener for repair works on aluminum, bronze, steel and iron. This reduces the product range to now six components. At the same time, the previously independent mixing ratio could be standardized. Both are important steps towards even greater process reliability and work optimization.

The two-component reaction resin system Ultrametal can be used to repair metal parts made of aluminum, bronze, steel and iron.
The two-component reaction resin system Ultrametal can be used to repair metal parts made of aluminum, bronze, steel and iron. (Source: Diamant Metallplastic)

With the new universal hardener, the coating is to be mechanically resistant after 24 hours, even at an ambient temperature of 10 °C. A second hardener developed for the product range is to enable reliable cold welding even at temperatures down to -5 °C. It can also be used as a rapid hardener at normal temperature.

This article was first published by konstruktionspraxis

Comments are being loaded ....

Leave a comment

The comment is checked by an editor and will be released soon.

Discuss anonymously or log in Log In

Avatar
To protect our interests, we store the IP address in addition to the above information. This is solely for the purpose of identifying you as the author of the comment. The legal basis is the protection of legitimate interests in accordance with Art. 6 para. 1 lit. f) DSGVO.
  1. Avatar
    Avatar
    Edited by at
    Edited by at
    1. Avatar
      Avatar
      Edited by at
      Edited by at

Comments are being loaded ....

Report comment

Kommentar Freigeben

Der untenstehende Text wird an den Kommentator gesendet, falls dieser eine Email-hinterlegt hat.

Freigabe entfernen

Der untenstehende Text wird an den Kommentator gesendet, falls dieser eine Email-hinterlegt hat.

copyright

This article is protected by copyright. You want to use it for your own purpose? Infos can be found under www.mycontentfactory.de (ID: 45453190 / Surface Treatment & Repair )