Mobile-Menu

Software reduces cutting time from nine to six days

The cutting force condition was set to 99 N, which is 90 percent of the analysis value, and the chip thickness condition was set to 0.15 mm, but the feed from 2,000 mm/min was doubled to 4,000 mm/min. (Source: CG Tech) arrow back arrow forward Image Zoom
The cutting force condition was set to 99 N, which is 90 percent of the analysis value, and the chip thickness condition was set to 0.15 mm, but the feed from 2,000 mm/min was doubled to 4,000 mm/min. (Source: CG Tech)
5/6
Back to the Article