Precision machining HIN Feinmechanik cuts scrap by shifting control into CAM preparation

Related Vendors

Renishaw plc

DIPROFIL Diamantprodukter AB

Ramada Acos

At HIN Feinmechanik, precision does not end at the machine table. Faced with growing demands on accuracy, process reliability and programming speed, the company shifted control upstream into CAM preparation — reducing collisions, manual rework and scrap before cutting even begins.

In precision machining there’s a particularly deceptive failure mode. Everything looks fine: the toolpath is “clean,” cutting is stable, the part is almost finished. And then you discover that you took off too much somewhere. Or the opposite — you left a small “island” of stock that now has to be removed by hand. Or, on the next setup, the tool suddenly can’t reach because the fixture wasn’t properly accounted for.

The cost hits the most expensive things first: time and repeatability. And when you’re running batches, there’s an added penalty — scrap: parts you simply can’t save. At HIN Feinmechanik, this is a shop-floor reality. What makes their story interesting is how they solved it: not by “being more careful at the machine,” but by moving control upstream — into preparation, where mistakes are still cheap.