Meusburger Workshop equipment
Machining, EDM accessories and clamping equipment. With these additions, Meusburger expands its product range. New products for measuring, lifting, and surface finishing were also added.
The new high-performance reamer from carbide (VHM) with TiAlN multi-layer coating ensures maximum performance and process reliability during machining. Thanks to high-quality cutting data, the machining times are reduced which leads to a reduction in processing costs. The high-performance steels are suitable for soft and hardened steels up to 65 HRC. The cooling channels on the shank ensure great cooling during machining, especially for through holes. The new reamers are available for through holes H7 (WZR 102520) as well as finished size (WZR 102522) with the hundredth graduations X.98 to X.02 in diameter range 3 to 12 mm.
The high-performance milling cutter for HPC machining with non-uniform pitch and centre cut is characterised especially by the so-called “chip breaker”. The interruption at the cutting edge ensures that short chips are produced and thus better chip removal is guaranteed. The result is an increase in process reliability due to the lower risk of chips getting jammed. In addition, the milling cutters with a diameter from 6 mm have a reinforced core. The milling cutter has a larger chip space in the front cutting area which gets smaller and smaller towards the shank. This leads to both better chip removal and more stability in the core of the milling cutter, according to then company. The new milling cutter is suitable for all steels, including stainless steels. Meusburger offers the WZF 126688 in a diameter range from 3 to 16 mm in the cutting lengths 4dx, available from stock.
Meusburger's new precision vice, which is precision-ground to exact angles on all sides and has knife-edge accuracy, is designed for horizontal, vertical and lateral milling, grinding, inspection and EDM work. The angle accuracy and parallelism is 0.003/100 mm. Thanks to the pull-down effect, lifting of the workpiece is prevented – so no knocking down is necessary, the company explains. The operation is carried out by means of an Allen key and the quick adjustment via stub shaft. The HWS 510 Precision vice is available in jaw widths 60, 75, 100 and 125 mm.
With the new quick-action clamping chucks HER 3012 for ITS-50 and HER 3032 for ITS-50/ITS-100, electrode holders can be clamped quickly and reliably using the threaded coupling. They are intended for electrode machining.
With around 100 new sizes, Meusburger has expanded its range of electrodes with system and multi-hole patterns made of copper and graphite. In addition, the graphite cut to customised dimensions are now also available in the grades Q70 (V 92221), Q60 (V 92224) and Q40 (V 92227) and in the thicknesses 90, 100, 120 and 150 mm.