Datentechnik Reitz / AMB

Version 12 with user-friendly interface and filled with goodies

| Editor: Briggette Jaya

Version 12's new 3D graphics has its the toolpath main colour in navy so that it can be more visible against the silver geometry and the job assisgnment is in green.
Version 12's new 3D graphics has its the toolpath main colour in navy so that it can be more visible against the silver geometry and the job assisgnment is in green. (Source: Datentechnik Reitz)

The completely redesigned CAM software SprutCAM 12 from Datentechnik Reitz will be presented at AMB.

Datentechnik Reitz's Version 12 of its SprutCAM 12 software has a new user interface and its windows UI has been replaced with one that incorporates modern web features as well as mobile applications.

The company says pages of different widths are now available. For e.g., a smaller one for a model page that requires less space, while a simulation page in the multi-channel mode requires more space. Auxiliary functions such as visibility and view controls from the ribbon have been replaced by a simple toolbar with page-specific buttons to enable easy page switching. Page heights have been increased to create more space for the job tree and the parameters inspector.

SprutCAM Version 12 allows for mutiple viewing of the machining tree.
SprutCAM Version 12 allows for mutiple viewing of the machining tree. (Source: Datentechnik Reitz)

The job tree at the machining page will have customisable columns. By default, the name of the operation, the number of the tool in use and the tool itself will be displayed. Adding columns is possible, like for machining time, toolpath lengths etc., and each can be viewed. In addition to the main view, there are feeds/speeds views and set-up views, which can be easily switched from one to the other, Reitz explains.

International tooling network - Connecting local heroes for global performance

Internationalisation

International tooling network - Connecting local heroes for global performance

05/02/2018 - The international tooling network is a concept by WBA Tooling Academy Aachen to enable tool shops to internationalise their production. In six steps, tool shops are prepared for successful and effective collaboration around the globe. read...

Further changes include; a more legible parameters inspector; a tool list that is stored separately from the tools that are in operation. This list includes detailed information of tools in other projects; enhanced 3D graphics, machine components, set-up stage functions, PMI support, new 2D geometry, new G-code milling operation, new solid simulation, updated Moduleworks module, extended machining capabilities, a new plunge roughing feature, check holders for 3D milling operations and roughing waterlines, a 5-axis toolpath conversion, new 5D geodesic toolpath feature and other updated addins. Among these addins are the Autodesk Inventor Professional 2018, the CAD-Bro 2018, Iron-CAD 2018, Solidworks 2018 and Space-Claim 2018.

Comments are being loaded ....

Leave a comment

The comment is checked by an editor and will be released soon.

Discuss anonymously or log in Log In

Avatar
To protect our interests, we store the IP address in addition to the above information. This is solely for the purpose of identifying you as the author of the comment. The legal basis is the protection of legitimate interests in accordance with Art. 6 para. 1 lit. f) DSGVO.
  1. Avatar
    Avatar
    Edited by at
    Edited by at
    1. Avatar
      Avatar
      Edited by at
      Edited by at

Comments are being loaded ....

Report comment

Kommentar Freigeben

Der untenstehende Text wird an den Kommentator gesendet, falls dieser eine Email-hinterlegt hat.

Freigabe entfernen

Der untenstehende Text wird an den Kommentator gesendet, falls dieser eine Email-hinterlegt hat.

copyright

This article is protected by copyright. You want to use it for your own purpose? Infos can be found under www.mycontentfactory.de (ID: 45419429 / CAD/CAM)