This is what the exhibitors at fakuma are going to show

Fakuma 2018 This is what the exhibitors at fakuma are going to show

28.09.2018 | Editor: Rosemarie Stahl

Fakuma is approaching rapidly. This year's trade show comes with more than 1,800 axhibitors. Here are some of the product highlights.

Related Companies

DIPROFIL Diamantprodukter AB

All around plastics and plastics processing: Fakuma 2018. — All around plastics and plastics processing: Fakuma 2018.
(Source: P.E. Schall)

The international trade fair for plastics processing, Fakuma, returns to Friedrichshafen in 2018. From 16 to 20 October, the plastics industry will meet at the trade show grounds to witness the latest trends and technology of the plastics industry. Here are more than 20 products that will be on show at Fakuma 2018:

The new Roboshot α-S450iA is equipped with a clamping force of 4500kN and boasts of a tie bar distance of 920mm by 920mm.

A synflow-equipped hot runner system. A 6-drop hot runner system will be demonstrated at Fakuma.

Version R16 has enhanced capabilities to achieve high-quality RTM parts.

The Easytherm from Aquatech, a Piovan company.

Ampacet supplies manufacturers with high volume general purpose and specialty masterbatches.

The injection of loudspeaker grilles for car door linings using the new, slim DF 8 nozzle.

The flat centring units feature a tight-fitting tolerance for the centring of two mould halves.

The Combi 120H combines dry ice pellet production and dry ice blasting into one system.

The geometrically different components of the caliper have two different shot weights of 5.5 g and 3.5 g respectively.

The debut of Roboshot α-S450iA was celebrated in Japan last year, Fanuc says.

Flex Flow technology is a solution for large and small applications, also difficult-to-process thermoplastics.

The XS Linear System is available as a fully balanced, wire-finished linear system or as a hot half.

The Coolshot system comes as a complete cold half with a pre-installed runner system or fully electric-wired for easy integration into moulds.

The Meusburger Group, including PSG and Segoni, will present tried-and-trusted as well as new products at Fakuma 2018.

The company's locking-block-cylinder, model VBZNI250 will also be on exhibit at the plastics processing show.

The oil and water filter Z7700 for small cooling bores and core coolings is easily integrated into cooling circuits.

The Fermapor CC polyurethane foam seal has a high water tightness that even survives damage to the surface.

Sitrasur² was analysed by the University of Applied Sciences in Darmstadt.

Arburg and its presentation at Fakuma 2018 are showing the “Road ro Digitalisation”.

Mold-Masters' Fusion- Series G2 is a hot runner system that is delivered completely pre-assembled and pre-plumbed.

(ID:45522386)