:quality(80)/images.vogel.de/vogelonline/bdb/1858200/1858202/original.jpg "Rottenburg-Ergenzingen is home to the Ensinger Group’s biggest injection moulding plant.
The measures for reducing CO2 emissions primarily address energy management and
material resources. For example, the percentage of electricity obtained from renewable
energies is to be gradually increased. In addition, more and more materials will be integrated
into a material cycle.")
:quality(80)/images.vogel.de/vogelonline/bdb/1857200/1857233/original.jpg "Dr Jochen Kress, President of the Mapal Group, at the annual press conference 2021")
:quality(80)/images.vogel.de/vogelonline/bdb/1856700/1856736/original.jpg "Trumpf started the new fiscal year with stable sales and very good incoming orders.")
:quality(80)/images.vogel.de/vogelonline/bdb/1856700/1856724/original.jpg "“Moldino has already established a broad customer base in Austria. We will soon expand our team, consisting of two process optimizers for Upper Austria and Tyrol, with a further team member for the Vorarlberg region,” reports Karsten Baas, Team Leader Sales with responsibility for Austria.")
:quality(80)/images.vogel.de/vogelonline/bdb/1859100/1859105/original.jpg "Leader Fial’s extensive new steady rest range will be launched at EMO Milan 2021.")
:quality(80)/images.vogel.de/vogelonline/bdb/1857200/1857270/original.jpg "The Ecta Conference 2022 will take place in Rüschlikon, Switzerland, at Hotel Belvoir.")
:quality(80)/images.vogel.de/vogelonline/bdb/1856900/1856931/original.jpg "Efficient die or mould handling throughout the entire process chain: rack systems and changing carts are equipped with a uniform docking system to transport dies or moulds safely.")
:quality(80)/images.vogel.de/vogelonline/bdb/1854000/1854026/original.jpg "Horn’s DS system for dynamic HPC milling excels at dynamic roughing applications as well as standard roughing cycles.")
:quality(80)/images.vogel.de/vogelonline/bdb/1857200/1857215/original.jpg "For rotary tables used in highly dynamic machining centers, Schaeffler offers high-performing ranges of bearings, including variants with integrated angle measuring systems and direct drives (shown here: YRTCMA rotary table bearing with integrated angle measuring system).")
:quality(80)/images.vogel.de/vogelonline/bdb/1854000/1854037/original.jpg "The system compression spring wizard from Meusburger simplifies the design process.")
:quality(80)/images.vogel.de/vogelonline/bdb/1856500/1856540/original.jpg "The sustainability benefits of 6K’s Unimelt plasma wins it Top Product of the Year.")
:quality(80)/images.vogel.de/vogelonline/bdb/1854600/1854624/original.jpg "With its three application heads, the AM Cube can apply both wire and metal powder in various phases of production.")
:quality(80)/images.vogel.de/vogelonline/bdb/1852000/1852003/original.jpg "Eric Bader, Managing Director of ExOne, says the launch of Ex One's Metal 3D Printing Adoption Center is driven by increased interest by European manufacturers in metal binder jet 3D printing.")
:quality(80)/images.vogel.de/vogelonline/bdb/1851600/1851698/original.jpg "LPE has bolstered its capabilities with a Neo450s 3D printer. Pictured (l to r) from LPE: Craig Rea (Stereolithography Engineer), Simon Barber (Estimating Manger) and Tom Walls (Managing Director).")
:quality(80)/images.vogel.de/vogelonline/bdb/1858200/1858201/original.jpg "Cerin uses amongst others a MX7 Linear.")
:quality(80)/images.vogel.de/vogelonline/bdb/1855600/1855656/original.jpg "The Maxxturn 65 G2 ensures steady rest for shaft machining.")
:quality(80)/images.vogel.de/vogelonline/bdb/1855600/1855628/original.jpg "The working area of a DMP 35 fitted with the options of a 25-position tool magazine and an integrated swivelling rotary table for 5-axis machining.")
:quality(80)/images.vogel.de/vogelonline/bdb/1856500/1856574/original.jpg "Synchronising topology optimisation with toolpath planning creates efficient design-to-manufacture processes.")
:quality(80)/images.vogel.de/vogelonline/bdb/1856000/1856082/original.jpg "Sinumerik One, the first Digital Native CNC, represents the core element for the digital transformation of the machine tool world.")
:quality(80)/images.vogel.de/vogelonline/bdb/1855600/1855629/original.jpg "Hexagon software helps contract manufacturers win projects by connecting insights from planning, quotation, and sheet-metal manufacturing.")
:quality(80)/images.vogel.de/vogelonline/bdb/1854000/1854047/original.jpg "Hexagon gives every user of WORKNC CAM software access to Designer, an out-of-the-box CAD-to-CAM workflow with advanced modeling tools to accelerate preparation of solid models for manufacturing.")
:quality(80)/images.vogel.de/vogelonline/bdb/1856000/1856081/original.jpg "Oerlikon HRS Flow's new Mechanical Stroke Regulator (MSR) for hydraulic driven valve gate systems provides an easy-to-use way to adjust and balance melt flow at different gating points.")
:quality(80)/images.vogel.de/vogelonline/bdb/1854600/1854649/original.jpg)
:quality(80)/images.vogel.de/vogelonline/bdb/1851900/1851967/original.jpg "Esys becomes the \"digital locomotive\" of Günther Hot Runner Technology in order to meet the requirements facing Industry 4.0 and digital transformation.")
:quality(80)/images.vogel.de/vogelonline/bdb/1849300/1849383/original.jpg "The cooled ante-chamber bush from Meusburger provides optimal cooling in the gate point.")
:quality(80)/images.vogel.de/vogelonline/bdb/1854600/1854645/original.jpg "Sodick technology installed at Styles Precision with Jim Seccombe, Styles Precision Technical Manager")
:quality(80)/images.vogel.de/vogelonline/bdb/1359100/1359159/original.jpg "Electric discharge machining does not use any force to remove material. Instead, an electric discharge occurs between workpiece and tool. In this case, a wire is used to “cut” the material.")
:quality(80)/images.vogel.de/vogelonline/bdb/1841200/1841290/original.jpg "A cable tie plastic injection mould being sparked on the EDNC6.")
:quality(80)/images.vogel.de/vogelonline/bdb/1839700/1839788/original.jpg "The special feature of the innovative EDG technology is the combination of electrical discharge machining and mechanical grinding.")
:quality(80)/images.vogel.de/vogelonline/bdb/1850400/1850479/original.jpg "One of the world’s fastest digital manufacturers has launched a Critical to Quality (CTQ) inspection service for its on-demand injection moulding.")
:quality(80)/images.vogel.de/vogelonline/bdb/1848300/1848348/original.jpg "The new research project \"Irlequm\" for process optimisation and quality improvement in massive forming starts at the WZL of the RWTH Aachen.")
:quality(80)/images.vogel.de/vogelonline/bdb/1844900/1844994/original.jpg "Nikon Metrology has completed its series of Nexiv VMZ-S video measuring machines with the introduction of two larger models. Pictured is the largest capacity machine, the VMZ-S6555, with a 650 x 550 x 200 mm measuring volume.")
:quality(80)/images.vogel.de/vogelonline/bdb/1844600/1844614/original.jpg "In ultrasound inspection by through-transmission, signals coupled by water jet must arrive at the receiver from the transmitter with less than 0.3 mm deviation.")
:quality(80)/images.vogel.de/vogelonline/bdb/1850400/1850495/original.jpg "Zerobot 100V eco provides flexible automation.")
:quality(80)/images.vogel.de/vogelonline/bdb/1846600/1846603/original.jpg "Last year, the award went to Arch Cutting Tools for its outstanding use of multiple iGrind operations with multiple complex profiles.")
:quality(80)/images.vogel.de/vogelonline/bdb/1838700/1838721/original.jpg "The diamond dressing station can now be moved along the machine bed to reduce non-cutting times at Sulzer.")
:quality(80)/images.vogel.de/vogelonline/bdb/1856900/1856946/original.jpg "Professional die body cleaning carried out by Oerlikon Neumag restores items virtually to their original state.")
:quality(80)/images.vogel.de/vogelonline/bdb/1855100/1855140/original.jpg "Arburg and Leonhard Kurz achieve gentle handling of surface-decorated washing machine panels. The handling is carried out by a linear robot system of the type Multilift V 40 from Arburg.")
:quality(80)/images.vogel.de/vogelonline/bdb/1848600/1848632/original.jpg "Interlayer mesh screens for chemical or thermal parts cleaning")
:quality(80)/images.vogel.de/vogelonline/bdb/1859200/1859220/original.jpg "The Blöcher Foundry can fabricate large blow moulds, deep-drawing moulds and foaming moulds made of aluminium with dimensions of up to 2,000 x 3,000 meters and unit weights of up to 2.5 tons within just a few weeks.")
:quality(80)/images.vogel.de/vogelonline/bdb/1859000/1859019/original.jpg "What are the advantages of recycled aluminium?")
:quality(80)/images.vogel.de/vogelonline/bdb/1846900/1846905/original.jpg "Horst-Werner Bremmer, Head of Application Technology Consulting and Sales, moderated the lecture programme of the 1st Guenther Virtual Technology Day.")
:quality(80)/images.vogel.de/vogelonline/bdb/1841400/1841403/original.jpg "The new HX5 grade from the “NTK Ceramix” range is suitable for machining at depths of cut from 0.1 to 0.5 mm.")
Exhibitions Swiss show organiser launches additive manufacturing expo
Switzerland - Messe Luzern (Lucerne Exhibition Centre) will launch a new additive manufacturing trade show, AM Expo, to be held on 20 and 21 September 2016.
Related Companies
:fill(fff,0)/images.vogel.de/vogelonline/companyimg/57400/57472/65.jpg "B2B_Fahne_quadratisch.jpg")
(Source: Messe Luzern)
According to the organiser, the fair will focus on the fast-growing series production market, which has progressed well beyond the stage of prototype production.
Manufacturing UK event to highlight reshoring
To help manufacturers master the challenges of series production, AM Expo will have machine manufacturers and contractors (service providers) at the fair to show exactly what can be done, and which technologies function reliably, Messe Luzern explained. AM Expo is aimed at the medical technology, industry, mobility, electronics and micro-technology markets. Developers and engineers in these sectors will find AM Expo a useful source of information, the organiser said.
AM Expo is to be launched at a kick-off event on 24 June 2015.
(ID:43319497)
:quality(80)/images.vogel.de/vogelonline/bdb/1678200/1678292/original.jpg "Packaging is, of course, on of the most important industries that uses plastic.")
:quality(80)/images.vogel.de/vogelonline/bdb/1725300/1725352/original.jpg "The preparations for Moulding Expo 2021 are gathering momentum – the first key players have already registered.")