MEX/ Schott Systeme

Streamlined mould design and machining

| Editor: Briggette Jaya

Experts will be on hand at Moulding Expo to present the range of technologies available with the company's latest software.
Experts will be on hand at Moulding Expo to present the range of technologies available with the company's latest software. (Bild: Schott Systeme)

With Schott Systeme's Pictures by PC CAD/CAM software, company experts will be on-hand at the Moulding Expo to show visitors the advantages of its software.

Germany-based software developer Schott Systeme will demonstrate in Stuttgart a range of technologies that streamline mould tool design and machining with the company's Pictures by PC CAD/CAM software.

With this software, the semi-automatic splitting of CAD solid and surface parts at edges and silhouettes curves aids in the creation of core and cavity surfaces. Scanned models can also be used as a basis for mould-making, enabling support for undercut detection, splitting of mesh models and mesh offsetting for the application of wall thicknesses, the company explains.

Schott also notes that productivity gains in mould machining can be achieved with the company's Pictures by PC 3.8 software version. The introduction of the HPC (high performance cutting) Trochoidal 3D Roughing function facilitates quick removal of harder tooling materials.

Spiral Finishing subsequently enables the moulds to be finished using a single spiral toolpath that maintains constant contact between the tool and work piece, removing the need for connecting and retraction toolpaths. This is said to reduce machining time, while improving surface finish. The maximum tool step-over is also calculated in relation to the angle of the surfaces to be machined (flat and steep regions), which thus ensures a maximum machining cusp height regardless of the region that needs to be machined.

At Moulding Expo, Schott Systeme will be in Hall 5, Booth B50.

Tracking the global mould industry

Markets

Tracking the global mould industry

09/05/2019 - Markets – The mould industry is predicted to grow further in the near future according to Business Research Company. read...

Comments are being loaded ....

Leave a comment

The comment is checked by an editor and will be released soon.

Discuss anonymously or log in Log In

Avatar
To protect our interests, we store the IP address in addition to the above information. This is solely for the purpose of identifying you as the author of the comment. The legal basis is the protection of legitimate interests in accordance with Art. 6 para. 1 lit. f) DSGVO.
  1. Avatar
    Avatar
    Edited by at
    Edited by at
    1. Avatar
      Avatar
      Edited by at
      Edited by at

Comments are being loaded ....

Report comment

Kommentar Freigeben

Der untenstehende Text wird an den Kommentator gesendet, falls dieser eine Email-hinterlegt hat.

Freigabe entfernen

Der untenstehende Text wird an den Kommentator gesendet, falls dieser eine Email-hinterlegt hat.

copyright

This article is protected by copyright. You want to use it for your own purpose? Infos can be found under www.mycontentfactory.de (ID: 45890798 / Software)