Blechexpo 2019 / Meusburger

Stamping and forming die sets at Blechexpo

| Editor: Steffen Donath

The SBP stamping and forming die set with spring-loaded guiding plate from Meusburger.
The SBP stamping and forming die set with spring-loaded guiding plate from Meusburger. (Source: Meusburger)

At this year's Blechexpo in Stuttgart (5-8 November), the Meusburger booth (hall 6, booth 6107) will feature the standardised stamping and forming die set from Meusburger and Bihler.

A special highlight at this year's Blechexpo will be the standardised stamping and forming die set, which is the first of its kind and was developed in cooperation with Bihler for the Bihler NC presses. The new die sets in types ‘tunnel cut’ or 'spring-loaded guiding plate' are available for stamping presses with forces up to 400 kN and promise to bring enormous savings in time and cost for Meusburger and Bihler customers in future.

The newly developed SB stamping and forming die sets are offered for Bihler NC presses with stamping forces of 200 kN, 300 kN and 400 kN. The die sets are available in lengths up to 596 mm and in the types ‘SBH tunnel cut’ or ‘SBP spring-loaded guiding plate’. While the tunnel cut version is primarily used for prototypes and small batches, the version with spring-loaded guiding plate is ideally suited for producing high precision parts and large quantities.

The standardisation of stamping and forming die sets has great advantages: they are more cost-effective, and they are available from stock. The die sets themselves also offer many product advantages — such as: precision alignment edges and practical anti-rotation protection, as well as helpful mounting threads in the plates for pull handles, eye bolts and spacer discs, and useful vent holes, according to Meusburger.

In addition to Meusburger, the associated companies WBI and Segoni will also be presenting their range of products for mould- and die-makers to the trade fair visitors. WBI Knowledge Management will introduce their software specially developed for the knowledge management method. With this software, the resource of knowledge can be collected, shared, further developed and saved thus preventing the loss of important know-how.

Segoni in turn will offer a live presentation of the latest version of their software which enables efficient production planning and focuses on companies with individual production structures active in the fields of mould, die, and jigs and fixtures construction. They will also provide information for visitors on the use and capabilities of the system.

Highlights from Meusburger at K 2019

K 2019 / Meusburger

Highlights from Meusburger at K 2019

20/08/2019 - At this year's K trade fair in Düsseldorf (16 to 23 October), the Meusburger booth will feature the new and one-of-a-kind configurator for hot runner moulds. read...

Comments are being loaded ....

Leave a comment

The comment is checked by an editor and will be released soon.

Discuss anonymously or log in Log In

Avatar
To protect our interests, we store the IP address in addition to the above information. This is solely for the purpose of identifying you as the author of the comment. The legal basis is the protection of legitimate interests in accordance with Art. 6 para. 1 lit. f) DSGVO.
  1. Avatar
    Avatar
    Edited by at
    Edited by at
    1. Avatar
      Avatar
      Edited by at
      Edited by at

Comments are being loaded ....

Report comment

Kommentar Freigeben

Der untenstehende Text wird an den Kommentator gesendet, falls dieser eine Email-hinterlegt hat.

Freigabe entfernen

Der untenstehende Text wird an den Kommentator gesendet, falls dieser eine Email-hinterlegt hat.

copyright

This article is protected by copyright. You want to use it for your own purpose? Contact us via: support.vogel.de/ (ID: 46153360 / Components)