Search

Pokolm Square shoulder, slotting and chamfering with only one insert

| Editor: Briggette Jaya

Milling – Squareworx is Pokolm’s new, multifunctional milling system for precise machining in both 90° and 45° approach angles. One insert is thus enough to perform square shoulder, slotting, face and chamfering milling operations.

Related Companies

Each insert has four useable cutting edges with a corner radius of 0.8 mm.
Each insert has four useable cutting edges with a corner radius of 0.8 mm.
(Source: Pokolm)

Each insert has four usable cutting edges with a corner radius of 0.8 mm. Five different grades are available for the machining of all standard materials, ranging from roughing to finishing. The shell-type, threaded shank and end mills have the maximum number of teeth and used with the mandatory internal coolant supply, they provide high feed rates. The square shoulder and slotting cutters come in diameters from 25 to 66 mm. Chamfering milling cutters, for forward and reverse operations, are possible thanks to their geometry. They are available in diameters of 16 to 63 mm.

The four-way use of each insert together with its high removal rates enable a low-cost-per-cutting edge. Ease of cutting is possible, even for machines with less sophisticated geometry, Pokolm says.

(ID:44591155)