Logo
21.09.2017

News

SolidCAM UK Offers “Total Solution” Seminars

...participants watched live cutting demonstrations which exhibited the benefits and advantages of SolidCAM’s iMachining...

read...
Logo
14.09.2017

News

SolidCAM China held a successful summer training on SolidCAM 2017

July 17-19, 2017 - SolidCAM China held a successful summer training at Shanghai Electric Li Bin Technician Institute. Nearly 50 people from East China, Southern China and North China attended the training. SolidCAM’s engineers gave an overview of SolidCAM’s Simultaneous 5-Axis

read...
Logo
03.08.2017

News

InventorCAM & iMachining save time and money for a Vacuum and Laboratory Equipment company

...production preparation and programming time have decreased significantly and the scrap rate has been almost eliminated...

read...
Logo
27.07.2017

News

SolidCAM China and partner Tongtai held a successful iMachining Seminar

With iMachining, Tongtai customers have been able to save significantly on machining time and to improve the efficiency of the milling process.

read...
Logo
20.07.2017

News

Efficient CAD/CAM programming for ambitious 5X machining

...The preparation of CAM machining is now extremely simple...because iMachining has the technology assistants which optimally control all machining parameters. In doing so, it includes the material to be machined, the tool used, the geometry of the model and the CNC machine data

read...
Logo
13.07.2017

News

iMachining live cuttings at InterMold Thailand

...Visitors were amazed to see how the machining time for this part was reduced significantly from 40 minutes with standard milling to 8 minutes with iMachining!...

read...
Logo
06.07.2017

News

SolidCAM and iMachining take part in the manufacture of Škoda Fabia R5

...after only two months, iMachining had returned its investment! The main savings were in machining time, which were cut in half in many cases, compared to standard milling strategies....

read...
Logo
29.06.2017

News

Unimet d.o.o.: "Almost every part here was produced with iMachining!"

… The biggest satisfaction was to see how cutting time was reduced by 63% when using iMachining for large parts...

read...
Logo
28.06.2017

Article

When deep mould cavities overwhelm the CAM system

Manufacturing mould tools with a weight of 19 tons does not mean that the milling is less complex than with smaller tools. When German-based Pestel Pur Kunststofftechnik reached the limits of their CAM programming in difficult areas, they had to look for an alternative and turned...

read...
Logo
22.06.2017

News

SolidCAM China cooperated with Tongtai and Brother in CIMT2017 and impressed the visitors!

...the three companies participated in CIMT and presented the advantages and capabilities of SolidCAM’s integrated powerful CAD/CAM solution... Participants were extremely impressed to see iMachining in action

read...
Logo
11.06.2017

News

SolidCAM showcased iMachining at IMTEX 2017

Many of the participants benefited from the solution demonstrated by SolidCAM and confirmed that this was the best, never seen before kind of technology demonstration

read...
Logo
15.12.2016

News

iMachining success at Russian potential customer - 75% cycle time saving in Steel!

After watching the short period it took to program the part and the great savings that were made in cycle times on the CNC machine, they were very excited

read...
Logo
12.12.2016

News

iMachining 3D Win in Aluminum Part

..They liked very much the processing technology of iMachining 3D. They also liked the ease and speed of programming the part and of course the speed of cutting.

read...
Logo
08.12.2016

News

iMachining Saves Wuxi Turbine Blade Co. 60% in Cycle Time

SolidCAM’s engineer used iMachining 2D and decreased their roughing time from 30 minutes to 12 (60% faster) ...

read...
Logo
05.12.2016

News

SolidCAM France replaced 2 Competitor CAM seats thanks to Partner/iMachining/Multiblade module

...thanks to iMachining, I got the full attention of the manager and they started to envisage to change their CAM System.

read...
Logo
28.11.2016

News

iMachining 3D Reduces Cycle Time for Workpieces in Aluminum by 40% & Stainless Steel by 77%

By using iMachining 3D, Bock and Klingenberg reduced milling times by 40% and 77%.

read...
Logo
24.11.2016

News

High Technology Methods of Metalworking: from Model to Product

On 26 April 2016, a workshop “Modern high technology methods of metalworking: from model to product” was organized by SolidCAM authorized reseller in Russia – CAM Systems in cooperation with Hoffmann Professional Tools ZAO and InterCAD

read...
Logo
22.11.2016

Article

New Technology Centre to support growing consumer demand

UK – Solidcam UK opened a new Technology Centre based in Little Horwood, Milton Keynes, on 1 November 2016, in line with the company's ever-growing consumer demand and to stay ahead in what it describes as a competitive and fast-moving market.

read...
Logo
21.11.2016

News

Nordwig Werkzeugbau GmbH achieved a reduction in cycle time with iMachining of up to 80%

After evaluating the SolidCAM Trial version, Nordwig Werkzeugbau used iMachining to reduce their cycle times by 80%.

read...
Logo
17.11.2016

News

SolidCAM China held a successful summer training on Sim. 5x & Mill-Turn

At the end of the five day training, participants were satisfied and gave high praises

read...
Logo
14.11.2016

News

Kingdom Flow Control Co. Reports 50% Cycle Time Savings Using iMachining 3D + HSM vs. Competitor CAM …

SolidCAM recently visited Kingdom Flow Control Co., LTD., to demonstrate iMachining 3D + HSM. Kingdom was using a competitor CAM that needed 5 hours to process the part.

read...
Logo
10.11.2016

News

SolidCAM China and Tongtai Group work together to form a winning partnership

SolidCAM’s advanced technology and revolutionary iMachining together with the advantages of Togtai’s highest quality machines is a winning combination for any factory

read...
Logo
07.11.2016

News

Nova Metal Saves 67% in CNC Cutting Time with SolidCAM's iMachining!

SolidCAM visited Nova Metal to demonstrate iMachining 2D on steel.

read...
Logo
03.11.2016

News

SolidCAM & iMachining WOW Crowds at IMTS 2016!

In order to showcase the immense power of SolidCAM’s iMachining to save cutting time and extend tool life, SolidCAM had their booth in the adjoining hall to the CAM Software Pavilion, and exhibited LIVE iMachining cutting on 2 CNC machines.

read...
Logo
31.10.2016

News

iMachining savings of 45 seconds made the difference needed for an existing customer to ultimately increase profit margins

...In the one roughing operation the part had, SolidCAM saved 70% in cycle time, which saved 7% of the overall machining time...

read...
Logo
27.10.2016

News

SolidCAM UK Opens New Technology Centre

The new centre will be the perfect place to demonstrate the power of SolidCAM software and show-case and test their latest technologies

read...
Logo
12.07.2016

News

Australian customer iMachining Success in Aluminum!

..SolidCAM user can remove 7.7KG of material that they have never cut before in 17 minutes!...simply amazing!

read...
Logo
05.07.2016

News

iMachining 3D Preview at AMT magazine in Australia

..iMachining 3D automatically produces a complete, ready-to-run CNC program with optimal cutting conditions, to rough and rest rough a complete 3D part

read...
Logo
28.06.2016

News

ISCAR & SolidCAM cooperation: successful iMachining benchmark at SolidCAM customer

...excellent iMachining benchmark – saving 72% in cycle time, cutting deep in stainless steel with ISCAR tools..

read...
Logo
21.06.2016

News

iMachining benchmark at SolidCAM customer who machine Electronic products

...saving 72% in cycle time, cutting deep in stainless steel..

read...
Logo
14.06.2016

News

Hurco uses iMachining to showcase their UltiMotion technology

..SolidCAM US have created an excellent close relationship with Hurco HQ and resellers in the US... we have received a HURCO VM10i CNC machine for our PA office to do live cuttings with iMachining

read...
Logo
07.06.2016

News

iMachining 3D benchmark in Cadron Aviation: saving 56% in cycle time, cutting deep in Aluminum

The programmer could not believe that even though they have to fix the part with vacuum fixation, the part can be cut at such high speed.

read...
Logo
31.05.2016

News

57% Time saving in A.A. Daniel with iMachining 3D, compared to other CAM High Speed Machining

.. the programming process in SolidCAM is much easier, faster and more effective, compared to the other CAM system...They were very excited to see the results with iMachining 3D

read...
Logo
24.05.2016

News

Cutting steel part with iMachining in INCOMAC company - saving 75% in cycle time on a part that has a 200 per-month run!!

..they were shocked and had no words, calculating how much iMachining would save on the 200 part run they must machine every month!

read...
Logo
17.05.2016

News

iMachining benchmark at SolidCAM customer Meir Mechanics - saving 74% in Aluminum!

...the director did not expect that you can save so much in aluminum, especially when working on the indexial 4-axis machine.

read...
Logo
10.05.2016

News

iMachining success - cycle time reduction by 70% against Competitor CAM in Aluminum

..prospect working with Competitor CAM and wanted to change for a CAM solution integrated in SolidWorks... impressed to see how easy it was to machine his part with iMachining in such a short time and get a such good result at the first try

read...
Logo
03.05.2016

News

iMachining article in MCADCafe

Jeff Rowe: "...iMachining controlling a Hurco VMX42 HSi ..significant improvement in cycle time efficiency/time savings (in this case, more than 70%), as well as reduced tool wear"

read...
Logo
26.04.2016

News

iMachining saves 75% in stainless steel at SolidCAM customer Shifram

...so iMachining will bring this customer back to subscription and will provide him with its immense power and savings...

read...
Logo
19.04.2016

News

Markus Schmid, SCNC Technik, Villingen Schwenningen: "iMachining paid for itself within 2 months"

..I really should not even recommend iMachining because then my competitors also get it...but iMachining is just great"

read...
Logo
12.04.2016

News

SolidCAM customer A.P.A orders 2 modules of iMachining 2D and 3D, mainly for aluminum machining

..owner said: "amazing... I have no words to describe my satisfaction from iMachining - I couldn't have imagined how much time it saved us in Aluminum"

read...