Logo
31.05.2016

News

57% Time saving in A.A. Daniel with iMachining 3D, compared to other CAM High Speed Machining

.. the programming process in SolidCAM is much easier, faster and more effective, compared to the other CAM system...They were very excited to see the results with iMachining 3D

read...
Logo
24.05.2016

News

Cutting steel part with iMachining in INCOMAC company - saving 75% in cycle time on a part that has a 200 per-month run!!

..they were shocked and had no words, calculating how much iMachining would save on the 200 part run they must machine every month!

read...
Logo
17.05.2016

News

iMachining benchmark at SolidCAM customer Meir Mechanics - saving 74% in Aluminum!

...the director did not expect that you can save so much in aluminum, especially when working on the indexial 4-axis machine.

read...
Logo
10.05.2016

News

iMachining success - cycle time reduction by 70% against Competitor CAM in Aluminum

..prospect working with Competitor CAM and wanted to change for a CAM solution integrated in SolidWorks... impressed to see how easy it was to machine his part with iMachining in such a short time and get a such good result at the first try

read...
Logo
03.05.2016

News

iMachining article in MCADCafe

Jeff Rowe: "...iMachining controlling a Hurco VMX42 HSi ..significant improvement in cycle time efficiency/time savings (in this case, more than 70%), as well as reduced tool wear"

read...
Logo
26.04.2016

News

iMachining saves 75% in stainless steel at SolidCAM customer Shifram

...so iMachining will bring this customer back to subscription and will provide him with its immense power and savings...

read...
Logo
19.04.2016

News

Markus Schmid, SCNC Technik, Villingen Schwenningen: "iMachining paid for itself within 2 months"

..I really should not even recommend iMachining because then my competitors also get it...but iMachining is just great"

read...
Logo
12.04.2016

News

SolidCAM customer A.P.A orders 2 modules of iMachining 2D and 3D, mainly for aluminum machining

..owner said: "amazing... I have no words to describe my satisfaction from iMachining - I couldn't have imagined how much time it saved us in Aluminum"

read...
Logo
05.04.2016

News

iMachining at SolidCAM's customer ZARKON - saving 86% in Steel!

...cutting deep in steel...after cutting the three parts, the tool remained in perfect condition!

read...
Logo
29.03.2016

News

Jeff S.: "iMachining is incredible at removing large amount of material in hard to reach areas such as the magwell and fire control pockets."

...thanks to the InventorCAM team, in 3 months time I have learned to run a Haas VF3SS and a rudimentary CAM program without any CNC background

read...