Hasco Hasenclever

Simple and flexible centring sleeve

| Editor: Briggette Jaya

The space-saving centring sleeve offers flexibility in mould design.
The space-saving centring sleeve offers flexibility in mould design. (Source: Hasco Hasenclever)

Hasco Hasenclever says its new centring sleeve Z21... offers manufacturers a solution that can be deployed simply and flexibly for the precise alignment of plates that are to be joined together.

Leading supplier of modular standardised components and accessories, Hasco Hasenclever, says its new centring sleeve Z21... offers manufacturers a solution that can be deployed simply and flexibly for the precise alignment of plates that are to be joined together on injection moulds.

With its space-saving positioning above the screw connection, this centring sleeve allows plates to be very easily centred in relation to one another and thereby offers even greater flexibility in mould design, states the Germany-based company.

The space-saving assembly in the build-up screw connection is further facilitated by a 15-degree, lead-in chamfer. The centring sleeve is also equipped with an integrated pull-out thread for particularly easy dismantling.

The new centring sleeve Z21/…, which is versatile in use, is suitable for maximum service temperatures of up to 200°C.

Attacks cost €43 billion damage

Germany

Attacks cost €43 billion damage

10/17/2018 - Sabotage, data theft and espionage have caused the German industry a loss of €43.4 billion in the past two years. Seven out of ten industrial companies (68%) were victims of such attacks during this period; one in five companies (19%) suspected this. read...

Comments are being loaded ....

Leave a comment

The comment is checked by an editor and will be released soon.

Discuss anonymously or log in Log In

Avatar
To protect our interests, we store the IP address in addition to the above information. This is solely for the purpose of identifying you as the author of the comment. The legal basis is the protection of legitimate interests in accordance with Art. 6 para. 1 lit. f) DSGVO.
  1. Avatar
    Avatar
    Edited by at
    Edited by at
    1. Avatar
      Avatar
      Edited by at
      Edited by at

Comments are being loaded ....

Report comment

Kommentar Freigeben

Der untenstehende Text wird an den Kommentator gesendet, falls dieser eine Email-hinterlegt hat.

Freigabe entfernen

Der untenstehende Text wird an den Kommentator gesendet, falls dieser eine Email-hinterlegt hat.

copyright

This article is protected by copyright. You want to use it for your own purpose? Infos can be found under www.mycontentfactory.de (ID: 45542743 / Components)