MEX/ Unisig

Seven manufacturing solutions - deep drilling and milling centres

| Editor: Briggette Jaya

The USC-M with the operating doors in the open position.
The USC-M with the operating doors in the open position. (Bild: Unisig)

With seven new, dynamic and versatile machines, Unisig is out to show all visitors at Moulding Expo and convince them of the company's USC-M drilling and milling centres.

Unisig's new range of USC-M deep drilling and milling centres provide mould makers seven powerful and versatile solutions for workpiece diameters and weights of up to 3,600mm and 30t respectively. All machines combine several processes in one machine: deep-hole drilling and milling takes place on all four sides of a workpiece, reducing set-up time, while increasing accuracy. The machines also support high feed rates of modern indexable gun-drill tools.

Apart from using gun-drill, deep-hole drilling tools, several models of the range support the more effective BTA deep-hole drilling tools for the high-performance drilling of waterline holes. Also, a CAT-50 quill enables all deep-hole drilling tasks and machining operations. The machines are equipped with a 360° rotary work table and a programmable deep-drilling and machining spindle. These can be aligned using a pivot axis adjusted at 30° downwards and 15° upwards. The machines come with both Heidenhain's TNC 640 CNC controller and motors, and drives are used. A complete cover with oil mist extraction rounds up the machine.

This USC-M series has been expanded to include 4-6 axis models: for deep-hole drilling with gun-drilling tools and milling, with a universal spindle and a quick switch between deep drilling and milling operations for small to medium-sized workpieces.

5-7 axis machines are available for gun drilling and more efficient BTA deep-hole drilling tools, each with a designated spindle to increase performance: 7-axis machining centres for dynamic motion control, powerful milling spindle with gear reduction and an optional pallet changer. The USC-M38 enables workpieces with lengths of up to 2,000mm to be conventionally machined and deep-drilled in one clamping. USC-M50 can handle up to 3,000-mm workpieces.

At Moulding Expo, UNisig will be in Hall 9, Booth D04.

Scholarship for VDWF university programme

Messe Stuttgart

Scholarship for VDWF university programme

18/03/2019 - For the second consecutive year, Messe Stuttgart is awarding a scholarship for the advanced degree programme “Project Manager (FH) for Tool and Mould Making”. read...

Comments are being loaded ....

Leave a comment

The comment is checked by an editor and will be released soon.

Discuss anonymously or log in Log In

Avatar
To protect our interests, we store the IP address in addition to the above information. This is solely for the purpose of identifying you as the author of the comment. The legal basis is the protection of legitimate interests in accordance with Art. 6 para. 1 lit. f) DSGVO.
  1. Avatar
    Avatar
    Edited by at
    Edited by at
    1. Avatar
      Avatar
      Edited by at
      Edited by at

Comments are being loaded ....

Report comment

Kommentar Freigeben

Der untenstehende Text wird an den Kommentator gesendet, falls dieser eine Email-hinterlegt hat.

Freigabe entfernen

Der untenstehende Text wird an den Kommentator gesendet, falls dieser eine Email-hinterlegt hat.

copyright

This article is protected by copyright. You want to use it for your own purpose? Infos can be found under www.mycontentfactory.de (ID: 45891984 / Machining Equipment )