Creaform / Control

Self-calibration ensures higher throughput and 24/7 operations

| Editor: Briggette Jaya

The upgrades enable the user to run data acquisition, while simultaneously analysing previously acquired data to maximize throughput.
The upgrades enable the user to run data acquisition, while simultaneously analysing previously acquired data to maximize throughput. (Source: Ametek)

Global company specialising in accurate portable 3D measurement solutions and engineering services, Creaform, will present a productivity station and an auto-calibration kit for its R-Series scanners at Control in Stuttgart.

Creaform says its productivity station and an auto-calibration kit for the R-Series scanners are key upgrades to the company's robotic metrology dimensional measurement solution, which are offered as efficient alternatives to traditional shop-floor CMMs.

The Metra-Scan 3D R-Series solution enables manufacturers to combine optical measurements and industrial automation, ensuring reliability and an increase in inspection cycles. It has a smaller factory footprint and offers an accuracy of up to 0.030 mm and a resolution of up to 0.050 mm, Creaform notes.

These are the most shameless plagiarisms of 2018

Plagiarius 2018

These are the most shameless plagiarisms of 2018

02/22/2018 - Each year, the Aktion Plagiarius society awards the most shameless forgeries and imitations of products. In 2018, ten products were awarded with the negative prize. read...

Product Manager Jérôme-Alexandre Lavoie says: “The major mechanical and software upgrades to the R-Series product line allow operators to run data acquisition, while simultaneously analyzing previously acquired data to maximise throughput. Self-calibration limits the need for human involvement, ensuring higher throughput and 24/7 operation.”

The upgrades enable the user to run data acquisition, while simultaneously analysing previously acquired data to maximize throughput.
The upgrades enable the user to run data acquisition, while simultaneously analysing previously acquired data to maximize throughput. (Source: Ametek)

The company's 3D measurement solutions are good for dimensional inspection for quality control in production environments, combining optical portable CMMs, 3D scanners, photogrammetry and fully integrated dimensional inspection software. They can measure any component made of any material in a size from 0.1 m to 10 m, with an accuracy of up to 0.02 mm. It is good for validating dimensional conformity and quality of production tools, jigs, parts, assemblies, sub-assemblies and final products.

Comments are being loaded ....

Leave a comment

Discuss anonymously or log in Log In

Avatar
To protect our interests, we store the IP address in addition to the above information. This is solely for the purpose of identifying you as the author of the comment. The legal basis is the protection of legitimate interests in accordance with Art. 6 para. 1 lit. f) DSGVO.
  1. Avatar
    Avatar
    Edited by at
    Edited by at
    1. Avatar
      Avatar
      Edited by at
      Edited by at

Comments are being loaded ....

Report comment

Kommentar Freigeben

Der untenstehende Text wird an den Kommentator gesendet, falls dieser eine Email-hinterlegt hat.

Freigabe entfernen

Der untenstehende Text wird an den Kommentator gesendet, falls dieser eine Email-hinterlegt hat.

copyright

This article is protected by copyright. You want to use it for your own purpose? Infos can be found under www.mycontentfactory.de (ID: 45172839 / Quality Control)