Used Machines
  • Newsletter
  • Whitepaper
  • Webinars
Mobile-Menu
Used Machines
  • Newsletter
  • Whitepaper
  • Webinars
  • Markets
  • Events
  • Components
  • Additive Manufacturing
  • Machining Equipment
  • Software
  • Hot Runners
  • Cutting Tools
  • EDM
  • Quality Control
  • Machining Accessories
  • Surface Treatment & Repair
  • Materials
  • Issue Archive
  • Service
    • Galleries
    • Suppliers
Logo Logo
  • Markets

    Latest Articles in "Markets"

    Plastpol will once again be the meeting place for the plastics processing industry in Central and Eastern Europe.

    Plastpol Expo

    Everything about moulding machines, extruders and granulates

    The all-electric e-motion combines high performance with very low energy consumption.

    Plastpol

    Intelligent processes for improved efficiency and sustainability

    The hybrid Allrounder 520 H produces 32 pipettes in a cycle time of around six seconds at Plastpol.

    Plastpol

    Focus on digitalisation and automation

    Boy will present two completely different injection moulding machines at Plastpol.

    Plastpol

    Injection moulding machines: Different concepts for varying demands

  • Events

    Latest Articles in "Events"

    The international trade fair for manufacturing technology Metav, returns after a four-year break.

    Metav 2022

    International trade fair for manufacturing technology returns after a four-year break

    On October 15th, the first site-planning phase for AMB 2022 began.

    Metal Cutting Technology

    AMB: Meeting place for mechanical engineering prepares for full house

    Dr. Wilfried Schäfer, Executive Director of GrindingHub organizer VDW (German Machine Tool Builders' Association), is more than pleased with the figures.

    Grinding Hub 2022

    Grinding technology trade fair is fully booked

    The industry gathers at the MEX Meeting Point.

    Trade Fair for Tool, Pattern and Mould Making

    MEX Meeting Point: Kicking off Moulding Expo 2023

  • Components

    Latest Articles in "Components"

    High-quality materials make the quick-release couplings robust against vibrations and movements.

    Mould Components

    Clean break cooling range

    In the production of front caps made of LCP, direct gating of the new hot runner system from Günther, results in material savings of approx. 40 percent.

    Conserving resources

    How innovative hot runner technology uses material more efficiently

    Hasco's development department has remained busy over the last few months. The six innovations presented here include, for example, the Basezone control unit series, which features simple operation and precision. Find out what else is new.

    Plastics processing

    Hasco’s standard mould innovations for tool and mould makers

    The new product configurator by brandgroup effectively reduces the high complexity of designing and planning arc springs.

    Components

    New 3D CAD configurator for arc springs

  • Additive Manufacturing

    Latest Articles in "Additive Manufacturing "

    MakerBot and Ultimaker, two leaders in desktop 3D printing, announced that they have come to a business combination agreement.

    AM Market

    Makerbot and Ultimaker sign merger agreement

    The Inkbit Vista unlocks additive manufacturing at production scale.

    AM Materials

    Thermoset 3D printing materials for demanding industrial applications

    A new material network is set to creat a solution to provide AM customers with industrial grade material systems.

    AM Materials

    Network wants to advance industrial 3D printed parts production

    Shoe prototype printed using Agilus 30 materials for full color and flexibility.

    3D Printing Materials

    Stratasys introduced three new colour resin materials for realistic soft-touch prints

  • Machining Equipment

    Latest Articles in "Machining Equipment "

    Chairman of the Executive Board Christian Thönes: “We had an excellent start to the year and even achieved new record figures for order intake, Ebit, Ebit margin and free cash flow in the 1st quarter.”

    Forecast Confirmed

    DMG Mori reports record figures in first quarter 2022

    The Trufiber S’s beam delivery system has one or two outputs. The latter delivers laser light to two systems.

    Laser Technology

    Trumpf unveils new lines of fiber lasers for demanding welding and cutting use

    Schaeffler has opened its new tool technology centre in Höchstadt. Highlights include several automated robot lines (pictured) and time-saving support for developers. Here, stamping and forming tools, are the manufacturing focus.

    Tool Technology

    Schaeffler expands with new tool technology centre

    Guideways for the slide of the 64-compartment tool are cleanly finished with the Mapal Optimill-Hardened-Finish.

    Optimisation in mould making

    Flexibility and productivity with solid carbide tools

  • Software

    Latest Articles in "Software"

    Automated operator reporting takes away the need to fill in paper reports and produces results in real time, allowing any necessary corrective action to be taken immediately.

    Digital Transformation

    Business digitalisation for metal manufacturers in 5 easy steps

    Module Works announces the creation of three new senior positions as well as the successor to Heiko Weber, former Head of Digital Manufacturing.

    Three Dedicated Business Areas

    Module Works appoints new Business Heads

    The Module Works Insider Conference was one of the first events that gathered experts from the CAD/CAM industry and brought them together to exchange knowledge and ideas.

    MIC 2022

    Module Works to re-connect the CAD/CAM Industry

    Companies using the new version of Halcon machine vision software benefit from more efficient production.

    Machine Vision

    MV Tec expands deep-learning-based anomaly detection in Halcon 22.05

  • Hot Runners

    Latest Articles in "Hot Runners"

    All the components needed for the assembly are manufactured under the strictest quality specifications at Wirthwein Medical and integrated into the injection moulding tools.

    Mould Components

    How Wirthwein Medical halves set-up times with a new multicoupling system

    One version of the HPS III-MH111 integrates all main nozzles including the complete wiring into a separate nozzle retainer plate.

    New Nozzle Concept

    Hot runner systems: Optimised for syringe and pipette production

    Hasco introduces a new controller cart for hot runner control units.

    Helpful Accessories

    Controller cart keeps hot runner control units handy

    Mold-Masters is proud to announce a significant enhancement to our Advanced Plastic Leak Detection capabilities found on our Temp Master hot runner temperature controllers.

    Temperature Control

    Mold-Masters introduces manifold leak detection technology

  • Cutting Tools
  • EDM

    Latest Articles in "EDM"

    The HSD-351 is a compact and powerful EDM machine.

    EDM Machine

    Winbro relies on PP C&A for strategic outsourcing of machine assembly

    Paul Hitchcock, Innovations Manager at Peco, is happy with the investment in the Sodick ALC400G ‘i Groove edition’ wire-erosion machine.

    Wire EDM

    Model railway manufacturer fast-tracks another EDM machine

    Cheap graphite electrodes from China have been flooding the market.

    EDM

    EU counters dumped imports of graphite electrodes from China

    ECP

    This is how Electrochemical Polishing ensures smooth mould surfaces

  • Quality Control

    Latest Articles in "Quality Control"

    With the portable 3D scanners Go!Scan 3D, Handyscan 3D and Metrascan 3D and the 3D measurement software VXelements, Creaform provides the tools that the industry needs to perform precise measurements.

    Metrology

    Digital manufacturing and industry 4.0: Automated and portable 3D measurement solutions

    SWA39 Surf is a comprehensive fixating programme for surface and contour measurements.

    Control 2022

    Innovations in clamping technology for the metrology sector

    Precision motion control and automation specialist Aerotech has launched the 2nd generation of its ANT nanopositioning stages.

    Measurement Equipment

    Aerotech launches new ANT nanopositioning stages

    Featuring an accuracy to ±0.7μm, the LM Series combines the ease of use associated with the Keyence range with the breakthrough precision demanded across an ever broader range of applications.

    Metrology

    Measurement system now with even higher accuracy

  • Machining Accessories

    Latest Articles in "Machining Accessories "

    HSB Normalien now also offers products, peripherals and accessories for everything to do with plastics processing.

    Accessories for Mould Makers

    HSB Normalien expands online shop with new supplementary products, peripherals and accessories

    The Hoffmann Group is exhibiting at the Automatica trade fair in Munich for the first time.

    Automatica

    Unmanned loading and unloading of machine tools

    Multistation and French master reseller of the manufacturer Meltio, have just welcomed Axiome for the integration of Meltio Engine heads on robots.

    Automation Solutions

    Industrial Robots: Multistation signs agreement with Axiome Robotic Solutions

    Diebold has developed the MS 3.0. micro shrinking unit primarily for small-diameter milling cutters and their tool holders.

    Metav

    Heat protection for sensitive shrink chucks

  • Surface Treatment & Repair

    Latest Articles in "Surface Treatment & Repair "

    Work Finisher Tools feature a ceramic blade ideal for deburring and deflashing hard plastics while eliminating the fear of cutting your hands, fingers or damaging the moulded part in the process

    Surface Finishing

    Safe and easy deburring and deflashing with new ceramic tools

    Sprue cutters, pliers, side cutters, hand tools and many useful items for workshop needs now complete the range of HSB Normalien.

    Useful Tools

    New products for workshop equipment

    The laser cleaning process is completed in a few seconds.

    Surface Cleaning

    Compact and effective laser cleaning of workpieces

    The investment of Precision Micro comprised £5.1 million.

    Chemical Etching

    Precision Micro unveils major investment following 2019 fire

  • Materials

    Latest Articles in "Materials"

    737 recycled carbon sidewall prototype.

    Cannon Ergos collaborates with Boeing

    Thermoplastic composite aircraft sidewall panels made of recycled carbon fibre

    Vedanta Aluminium launches Restora low carbon green aluminium.

    Green materials

    Vedanta launches first low carbon aluminium from India

    Preserving value through circular economy. On Ash Wednesday, the German Plastics Processing Association (GKV) again took stock of how the German plastics processing industry is doing and where the problems lie. Here are the most important facts.

    Plastics industry

    Plastics processors report sales growth beset by uncertainties

    Fully automated injection moulding cell around a hybrid Allrounder 720 H in packaging version.

    Injection Moulding Cell

    Collaborative project: New approach to the production of thin-walled packaging

  • Issue Archive
  • Service
    • Galleries
    • Suppliers
  • more...
Login
  1. Events
  2. Rapid.Tech 2015

10.06.2015 - 11.06.2015 Rapid.Tech 2015

09.02.2015Editor: Barbara Schulz

International Trade Fair and Users' Conference for Rapid Technologies

Related Company

Logo.jpg BORIDE Engineered Abrasives
(Bildquelle: © Rapid.Tech)

Venue: Erfurt

www.rapidtech.de

(ID:43262140)

         

Related content

The combination of two additive manufacturing technologies reduces downtimes at Procter & Gamble.

AM strategy

Procter & Gamble cleverly combines additive and subtractive technologies

Luigi Galdabini, general commissioner of EMO Milano 2021

EMO 2021

Meet the “magic world of metalworking” in 2021

FOLLOW US ON:

Cookie-Manager Imprint About Media Privacy General Terms and Conditions Help

Vogel Logo

Copyright © 2022 Vogel Communications Group

This portal is a brand of Vogel Communications Group. You will find our complete range of products and services on www.vogel.com

Trumpf; Ucimu; Bildquelle: © Rapid.Tech; Plastpol; Engel; Arburg; Boy; Metav; Landesmesse Stuttgart; Uwe Nölke/ VDW; Uli Regenscheit/ Landesmesse Stuttgart; Hasco; Günther; Brandgroup; Steven van de Staak; Inkbit; Public Domain; Stratasys; DMG Mori; Schaeffler; Mapal; Lantek; Module Works; MV Tec; Wirthwein Medical; Ewikon; Christian Schörg/ Hasco; Mold-Masters; Winbro; Nick Matthews; PMM; Creaform; DK Fixiersysteme; Aerotech; Keyence; HSB Normalien; Hoffmann Group; Multistation; Diebold; Boride; Emag; Precision Micro; Cannon Group; Business Wire; Polymerfan; Christophe Brissiaud , Collomb Mécanique