Logo
01.08.2019

Article

Customised and extra small

Horn will have a variety of products on display at EMO. Two of which are customised form inserts and a clamping system for extra small boring tools.

read...
Logo
25.07.2019

Article

Milling instead of polishing

Horn is expanding its tool range. The monocrystalline diamond-tipped (MCD) ball nose end mills are intended for machining non-ferrous materials.

read...
Logo
02.07.2019

Article

Horn Technology Days a success

This time around, the Horn Technology Days 2019 ran under the theme “Technology.Transparency” from 5-7 June.

read...
Logo
24.05.2019

Article

Moulding Expo 2019 impressions

Moulding Expo 2019 is almost over. During our visit to the expo, we managed to snap quite a few interesting pictures which we have compiled into a gallery for you.

read...
Logo
01.04.2019

Article

Cost-effective cutters for high-speed machining of aluminium

Horn has expanded its DTM lightweight milling system to include two new versions.

read...
Logo
05.02.2019

Article

Coating Gets Most Out of Precision Tools

Higher chip removal rates, shorter cycle times — and this includes carbide machining: Precision tools are in high demand. Tool coatings make a significant contribution to meeting these user requirements.

read...
Logo
25.01.2019

Article

Horn receives ZF supplier award

Winners of the ZF awards came from all over the world. Among them is also Horn in the supplier category.

read...
Logo
07.01.2019

Article

New technical managing director at Horn

Matthias Rommel took up his new position as Technical Managing Director at Paul Horn GmbH on 1 November 2018.

read...
Logo
03.01.2019

Article

Harnessing synergies – Combining competencies

Paul Horn GmbH uses additive manufacturing to produce its own tools, particularly when making prototypes, special tools and tool holders. Having recognised the advanced possibilities offered by additive manufacturing, Horn is now making these available to its customers and partne...

read...
Logo
28.03.2018

Article

Grooving system with extended working range

Horn's 25A axial grooving system with cartridge design and round shanks is more versatile now thanks to new versions that allow for grooving diameters of 50 to 65 mm and 65 to 80 mm.

read...
Logo
26.02.2018

Article

Horn now in Russia

Russia – Tübingen-based tool specialist in Germany, Paul Horn, has now a subsidiary in Moscow, Russia. Horn Rus LLC opened at the start of 2018 and has its own Russian team.

read...
Logo
27.01.2018

Article

Internal grooving with depths down to 7.5 mm

At Metav, Hartmetall-Werkzeugfabrik Paul Horn will present numerous tool products, among them Systems 209 and 2016. The grooving systems are designed for the internal machining of bores with diameters ≥ 16 mm (0.6299") (System 209) and ≥ 20 mm (0.7874") (System 216).

read...
Logo
22.05.2017

Article

New six-edged milling

Horn has developed the DA62, a new milling system for corner, face and plunge milling. This system uses a six-edged indexable insert. Both sides of the insert can be used and it has three axial and radial cutting edges on each side.

read...
Logo
26.01.2017

Article

A true, global Swabian

Swabians are often considered "the Scots of Germany". While this also implies all sorts of negative stereotypes, Swabians are also said to be hard-working, which is a prejudice that is certainly true for Lothar Horn.

read...
Logo
22.11.2016

Article

Logo
26.09.2016

Article

Horn and Boehlerit embark on joint sales cooperation for ISO turning, milling

Germany/Austria – Cutting Tool specialist Paul Horn used the opportunity of AMB, a home match for the Swabian company, to unveil a strategic innovation. Two independent carbide and tool manufacturers are about to embark on a joint sales cooperation for ISO turning and milling too...

read...
Logo
12.09.2016

Article

German precision tool industry expects additional boost from AMB

Germany – The German precision tool industry is flying high. Last year, the industry again grew by 3% to achieve the record production value of €9.6bn. The precision tool manufacturers expect another boost from AMB and want to continue the upward trend at a moderate pace.

read...
Logo
30.08.2016

Article

Grooving chip breaker inserts for widths of less than 2 mm

Germany – Horn's new narrow triple-edge cutting insert for the 315 type grooving system features a range of chip breaker geometries for full and partial cuts for grooving widths of less than 2 mm.

read...
Logo
04.04.2016

Article

Dashing high endurance three-sided tools

Germany – The wear-resistant Paul Horn indexable inserts type DAH37 are now available in two geometries. DAH37 are good as tough, wear-optimised and carbide indexable inserts for high feed milling, the company says.

read...
Logo
03.02.2016

Article

Lightweight materials call for MQL, internal cooling

Cutting Tools – The automotive industry increasingly opts for lightweight materials because of less fuel consumption and less CO2 emissions.

read...
Logo
26.11.2015

Article

Pinpoint cooling jet lubrication

Europe – The best cooling is useless if it doesn’t get to the blade. Therefore, tools with integrated coolant supply are increasingly used. Experts predict that the trend in cooling strategies is moving toward minimum-quantity lubrication and high-pressure cooling.

read...
Logo
10.10.2014

Article

Cutting insert designed for grooving and parting of stainless steels

Germany – The HP65-grade S224 cutting insert with internal cooling, featuring the 3V geometry and a 3 mm grooving width, is a new addition to the Horn range.

read...
Logo
28.08.2014

Article

Cutting to the quick of industry shifts foreign and domestic

Well respected in the manufacturing community, Lothar Horn runs his family’s cutting tool business and serves as chairman of the German Precision Tools Association. He talks about Germany’s trade fair landscape and serving the industry at home and abroad.

read...
Logo
25.04.2014

Article

Indexable cutting inserts offer gentle cut, top plane surfaces

High accuracy is another plus, according to the supplier.

read...