- Overview |
- News |
- Images / Videos |
- Products |
- Events |
- Downloads |
- job advertisement
- Overview |
- News |
- Images / Videos |
- Products |
- Events |
- Downloads |
- job advertisement
Article
Moulding Expo 2019 impressions
Moulding Expo 2019 is almost over. During our visit to the expo, we managed to snap quite a few interesting pictures which we have compiled into a gallery for you.
read...
Article
Article
Revolutionising surface qualities for graphite
OPS Ingersoll claims that its new EDM machine Eagle G5 Precision can achieve the highest precision results and the lowest electrode wear, which were not possible before – thanks to a whole new, innovative machine concept.
read...
Article
Investment in EDM machinery and HSC enables impressive growth
Gotools is a British company located in Rotherham, a 90-minute drive from Birmingham. In only a little over five years of existence, the company has managed to record a growth of around 50% per year. All that success started with the decision to buy a new EDM machine.
read...
Article
OPS-Ingersoll achieves a new level of precision machining with thermal stability
OPS-Ingersoll presents the latest generation of its EDM machines at EMO Hannover. The Eagle G5 Precision allows for higher precision thanks to thermal stability.
read...
Article
Flying high
OPS Ingersoll presented the next generation of the High Speed Eagle at Moulding Expo 2017.
read...
Article
In the fast lane with high-quality EDM and HSC technology
Germany – Finke Formenbau manufactures moulds and injection-moulded parts for premium cars. The company's order books are already full for the next six months. This is a result of the efficiency and quality the company achieves, among other things, high-quality EDM and HSC techno...
read...
Article
OPS Ingersoll hosts successful Open House
Germany - EDM and HSC specialist OPS Ingersoll hosted an Open House last month which attracted nearly 200 visitors from around 100 companies. The event featured a variety of presentations from long-standing OPS Ingersoll partner companies, covering the whole process chain from de...
read...
Article
Article
Portuguese mould makers pushing the limits
Like most European manufacturers, Portuguese mould makers are unable to compete on price alone. Those who take advantage of the latest technology, such as a combination of EDM technology and high-speed machining, will have an edge up on the competition.
read...
Article
EDM line automation increases quality and machine efficiency
Germany – Toolmaking company Alfred Jonscher has automated a sink erosion process to increase both quality and machine efficiency.
read...
Article
EDM centre in new line replaces older model built for larger electrodes
Germany – EDM applications are becoming larger and also more precisely detailed, according to OPS-Ingersoll.
read...
Article
Switching software cuts costs, time demands at Canadian shop
Changing over to software from Delcam for the design and manufacture of its electrodes has saved both time and money for a North American tool house by bringing farmed-out work back onto the shop floor.
read...
Article
Switch to graphite sparks more changes at in-house mould shop
A German manufacturer of components for the electronics industry found that a change-over from copper to graphite electrodes also rearranged the process for mould production.
read...
Article
Tool shop finds size doesn't matter for EDM automation
By integrating an OPS-Ingersoll EDM automation solution, a toolmaker has increased productivity and reduced electrode wear.
read...