Individual configuration of the contour Offset cutting punches at Meusburger
With the offset cutting punches from Meusburger there are many possibilities to configure the contour of cutting punches individually according to your needs. In addition, different materials and head shapes as well as coatings are available. These can be selected quickly and easily using the cutting punches configurator. Thanks to in-house production, Meusburger offers maximum precision and short lead times.
There are five different contours to choose from: round offset, oblong hole, rectangle, hexagon, and round flat. Anti-rotation protection on the head with optionally 0 or 90° to the contour can also be selected.
The cutting punches are available with cylindrical, conical, as well as bottle-neck head shapes. For the selection of the correct head shape, the space requirement of the head and the retracting forces during the stamping process are decisive. With the TiN and AlCrN coating, a considerably longer service life can be achieved due to the greatly reduced abrasive and adhesive wear. In addition, the coating reduces the coefficient of friction, which in turn reduces the stamping and retracting forces. With the cutting punches configurator, the standard parts manufacturer offers a simple and time-saving way to design cutting punches individually. The configurator can be accessed in the Meusburger web shop and offline shop. First the head shape, material and coating are selected, as well as the desired contour and also ejector and anti-rotation protection if required. Then the diameter and total length can be selected and the dimensions of the cutting geometry and cutting edge length can be entered. If a total length deviating from the standard is required, it is also possible to enter an individual value. With just a few clicks, the cutting punch is then adapted to your personal requirements and exported to the CAD system as a completely configured component.
Meusburger Georg at the Moulding Expo 2019: Hall 7, Booth C17
This article is protected by copyright. You want to use it for your own purpose? Contact us at support.vogel.de (ID: 45892430)