:quality(80)/images.vogel.de/vogelonline/bdb/1878300/1878337/original.jpg "Suppliers sound the alarm: A lack of willingness to engage in dialogue could cost their livelihoods.")
:quality(80)/images.vogel.de/vogelonline/bdb/1877900/1877956/original.jpg "Toyoda Gosei is increasing its interior/exterior part production capacity in the US.")
:quality(80)/images.vogel.de/vogelonline/bdb/1875100/1875111/original.jpg "Protolabs is a digital manufacturing source for custom prototypes and low-volume production parts.")
:quality(80)/images.vogel.de/vogelonline/bdb/1875000/1875020/original.jpg "Wematter Gravity is an SLS 3D-printing platform for additive manufacturing.")
:quality(80)/images.vogel.de/vogelonline/bdb/1880300/1880368/original.jpg "In his address, VDWF President Prof. Thomas Seul pointed out how important it was to be present as an association, especially during the pandemic crisis.")
:quality(80)/images.vogel.de/vogelonline/bdb/1877300/1877381/original.jpg "“Hello, new EMO Hannover!” is the greeting that was shared at the EMO Hannover Relaunch Conference in the hybrid event hub “H’UP” on the Hannover Messe trade fair grounds.")
:quality(80)/images.vogel.de/vogelonline/bdb/1874300/1874329/original.jpg)
:quality(80)/images.vogel.de/vogelonline/bdb/1871700/1871780/original.jpg "Intelect including an LSR package for elastomer injection moulding.")
:quality(80)/images.vogel.de/vogelonline/bdb/1878800/1878899/original.jpg "DLC coated components are suitable for use in clean-room conditions.")
:quality(80)/images.vogel.de/vogelonline/bdb/1859100/1859105/original.jpg "Leader Fial’s extensive new steady rest range will be launched at EMO Milan 2021.")
:quality(80)/images.vogel.de/vogelonline/bdb/1857200/1857215/original.jpg "For rotary tables used in highly dynamic machining centers, Schaeffler offers high-performing ranges of bearings, including variants with integrated angle measuring systems and direct drives (shown here: YRTCMA rotary table bearing with integrated angle measuring system).")
:quality(80)/images.vogel.de/vogelonline/bdb/1856900/1856931/original.jpg "Efficient die or mould handling throughout the entire process chain: rack systems and changing carts are equipped with a uniform docking system to transport dies or moulds safely.")
:quality(80)/images.vogel.de/vogelonline/bdb/1877400/1877414/original.jpg "With Codemeter, Wibu-Systems is offering a secure and long-established system that can handle all digital value chains in additive manufacturing.")
:quality(80)/images.vogel.de/vogelonline/bdb/1877300/1877373/original.jpg "CEM-E2 extruder for the 3D CEM process: Higher building speeds and improved component quality.")
:quality(80)/images.vogel.de/vogelonline/bdb/1879900/1879954/original.jpg "CNC milling centre MMV 3200")
:quality(80)/images.vogel.de/vogelonline/bdb/1879800/1879880/original.jpg "Pomini Tenova has successfully concluded the Life Cycle Assessment (LCA) analysis of Pomini Digital Texturing.")
:quality(80)/images.vogel.de/vogelonline/bdb/1879100/1879187/original.jpg "In Neukrich, Trumpf produces special system for sheet metal cutting.")
:quality(80)/images.vogel.de/vogelonline/bdb/1878600/1878638/original.jpg "The panther model demonstrates how to efficiently work with difficult, free-form components.")
:quality(80)/images.vogel.de/vogelonline/bdb/1869500/1869567/original.jpg "Multiaxis CNC programming expands almost any shop’s productivity. But savvy users can maximize their multiaxis proficiency by diving into five crucial concepts.")
:quality(80)/images.vogel.de/vogelonline/bdb/1874000/1874076/original.jpg "Hypermill in action at SRD.")
:quality(80)/images.vogel.de/vogelonline/bdb/1869200/1869241/original.jpg "The new Sigmasoft release allows users a more accurate prediction and analysis of warpage.")
:quality(80)/images.vogel.de/vogelonline/bdb/1877100/1877199/original.jpg "Elmet will be presenting its new Smartmix Top 7000 Pro LSR dosing system at Fakuma 2021.")
:quality(80)/images.vogel.de/vogelonline/bdb/1871800/1871857/original.jpg "Hasco will be presenting new developments and additions to existing product ranges, together with user-friendly tools, CAD features and digital services at Fakuma.")
:quality(80)/images.vogel.de/vogelonline/bdb/1871700/1871779/original.jpg "This webinar focuses on Integrated OEM System's (machines, hot runners, moulds & controllers) ability to reduce cost associated with wastage while ensuring performance.")
:quality(80)/images.vogel.de/vogelonline/bdb/1871700/1871777/original.jpg "The smart Control dashboard provides information on the current system performance at a glance.")
:quality(80)/images.vogel.de/vogelonline/bdb/1877100/1877105/original.jpg "The Intelligent Spark Protection System (ISPS) can automatically control and adapt the cutting parameters of a wire-cutting EDM machine, ensuring an improved, safe cutting process without wire breakage.")
:quality(80)/images.vogel.de/vogelonline/bdb/1877600/1877654/original.jpg "Contaminated or dirty dielectric fluid can negatively affect the Electrical Discharge Machining process causing problems such as slower cutting speeds, metal removal rate and lower quality and rejected parts that fail quality control.")
:quality(80)/images.vogel.de/vogelonline/bdb/1862900/1862971/original.jpg "One of the Mitsubishi machines in action at N&E Precision.")
:quality(80)/images.vogel.de/vogelonline/bdb/1866700/1866738/original.jpg "Makino’s EDAC1 is capable of producing corner radii of 0.00019 inches (0.005mm) and surface-finish quality of 0.000024 inches (0.6 micron) Ry, while providing repeatability in the submicron range.")
:quality(80)/images.vogel.de/vogelonline/bdb/1878500/1878564/original.jpg "Contributing to the Approve-project: Hüttemann (WZL), Dr. Schultz (Q-DAas), Huber (iqs Software), Dr. Kellermann-Langhagen (FQS ), Dr. Gutensohn (PFW Aerospace), Greipel (WZL), Herzogenrath (Lasuscher Präzisionstechnik), Radeck (Q-Das), Chishnjak (Tebit ), Kerbl (TCG Unitech)")
:quality(80)/images.vogel.de/vogelonline/bdb/1866500/1866554/original.jpg "With the Tomo Scope XS FOV 500 it is possible to measure multiple workpieces in one operation.")
:quality(80)/images.vogel.de/vogelonline/bdb/1867000/1867029/original.jpg "Zinkteknik achieved a zero-defect zinc die casting production of safety critical automotive parts with the help of test automation systems from Kistler.")
:quality(80)/images.vogel.de/vogelonline/bdb/1862500/1862574/original.jpg "A joint project from Porsche, Mahle and Trumpf, in cooperation with Zeiss, has successfully 3D-printed pistons for the high-performance engine of Porsche's top-of-the-line 911 model: the GT2 RS.")
:quality(80)/images.vogel.de/vogelonline/bdb/1871700/1871782/original.jpg "Knarr supplies plates made of Toolox 33 and Toolox 44. With the right drill from precision tool manufacturer Gühring, the holes in this material can be drilled in a very uncomplicated and process-reliable manner.")
:quality(80)/images.vogel.de/vogelonline/bdb/1869900/1869965/original.jpg "Hyfore has introduced ultrasonic toolholders designed for machining hard materials.")
:quality(80)/images.vogel.de/vogelonline/bdb/1869200/1869243/original.jpg "Aerotech supplies complete solutions for optical alignment and adjustment from a single source, such as the Fiber MaxHP photonic alignment platform for optoelectronics. On display for the first time at the trade fair with the latest Automation1 control software.")
:quality(80)/images.vogel.de/vogelonline/bdb/1865400/1865435/original.jpg "Renishaw is previewing its RMI-QE next-generation radio transmission system for probing on machine tools.")
:quality(80)/images.vogel.de/vogelonline/bdb/1864700/1864749/original.jpg "ASK Chemicals launched cut inoculants with tighter tolerances and higher specificity.")
:quality(80)/images.vogel.de/vogelonline/bdb/1864300/1864377/original.jpg "Ecoclean's complete range of system and process technologies offers technical and economical solutions for every cleaning task.")
:quality(80)/images.vogel.de/vogelonline/bdb/1856900/1856946/original.jpg "Professional die body cleaning carried out by Oerlikon Neumag restores items virtually to their original state.")
:quality(80)/images.vogel.de/vogelonline/bdb/1855100/1855140/original.jpg "Arburg and Leonhard Kurz achieve gentle handling of surface-decorated washing machine panels. The handling is carried out by a linear robot system of the type Multilift V 40 from Arburg.")
:quality(80)/images.vogel.de/vogelonline/bdb/1879200/1879208/original.jpg "Together with customers and partners, BASF has set itself the goal to contribute to a circular economy in which raw materials are conserved, plastic waste is reduced and materials can develop their full potential during use.")
:quality(80)/images.vogel.de/vogelonline/bdb/1875000/1875079/original.jpg)
:quality(80)/images.vogel.de/vogelonline/bdb/1874200/1874212/original.jpg "With its simulation tools, Lanxess is able to accurately predict the maximum stresses hollow-profile hybrids — such as automotive cross car beams (left-hand screen) — will withstand and at what point they will fail.")
:quality(80)/images.vogel.de/vogelonline/bdb/1872200/1872277/original.jpg "The FZero has just one seat, has more than 1,000 hp, and is said to make Formula 1 speeds possible for amateur racers.")
Plast 2015 More than 50,0000 visitors came to see what's new in plastics at Plast 2015
Italy - From 5 to 9 May, 1,584 exhibitors from 57 countries were showcasing machinery, products and materials at Fiera Milano, Italy.
Related Companies
:fill(fff,0)/images.vogel.de/vogelonline/companyimg/64200/64280/65.png "Diprofil_logo.png")
(Source: Plast)
According to the organisers, this represents a 5% increase as compared to the last event in 2012. 50,087 visitors came to see what's new in plastics, with 71.4% coming from Europe, 5.9% from Asia and 10.9% from the Middle East. The next Plast will be held from 26 to 30 September 2017 (not from 8 to 12 May 2018, breaking up, just for once, the 3-year cycle). One of the reasons is said to be the overlapping with Feiplastics and NPE moving from March to 7 to 11 May 2018.
(ID:43386138)
:quality(80)/images.vogel.de/vogelonline/bdb/1821600/1821600/original.jpg "Bergi-Plast uses modern machinery, including injection moulding machines with a closing force of 25 to 210 tons. Some of the machines are fitted with handling systems to remove and further process plastic parts.")
:quality(80)/images.vogel.de/vogelonline/bdb/1772900/1772906/original.jpg "Luigi Galdabini, general commissioner of EMO Milano 2021")