Logo
13.11.2019

Article

New products for hot runners and control systems

Meusburger's PSG product brand has expanded the number of versions of the Smartfill nozzle series with a new focus.

read...
Logo
04.11.2019

Article

K highlights presented by Meusburger

A new configurator for hot runner moulds, the new cavity pressure sensors and many other Meusburger products were presented to visitors, alongside hot runner and control systems.

read...
Logo
23.10.2019

Article

Meusburger joins forces in 2020

In 2020, Meusburger will fully integrate the hot runner and control systems specialist PSG, which was taken over in 2016, into the company. PSG will then operate under the Meusburger brand.

read...
Logo
21.10.2019

Article

Another complete success

Current topics and trends as well as networking and a look behind the scenes — All of this and more took place at the Meusburger Tool and Mould-Making Days 2019.

read...
Logo
25.09.2019

Article

Stamping and forming die sets at Blechexpo

At this year's Blechexpo in Stuttgart (5-8 November), the Meusburger booth (hall 6, booth 6107) will feature the standardised stamping and forming die set from Meusburger and Bihler.

read...
Logo
05.09.2019

Article

New embossing elements for die making

With the new embossing elements from Meusburger, stamped parts can be marked quickly and easily. On the one hand this serves for clear traceability of stamped parts, and on the other hand for visual monitoring of the correct machine parameters.

read...
Logo
20.08.2019

Article

Highlights from Meusburger at K 2019

At this year's K trade fair in Düsseldorf (16 to 23 October), the Meusburger booth will feature the new and one-of-a-kind configurator for hot runner moulds.

read...
Logo
13.08.2019

Article

Demoulding made easy with inclined ejection unit

Meusburger now offers the E 3270 inclined ejection unit for easy demoulding, which the company says is a cost-effective and ready-for-use alternative to currently available ejectors for inclined ejection units.

read...
Logo
09.08.2019

Products

Compact design with the Meusburger locking cylinder

With the E 7055 Locking cylinder, Meusburger offers a solution that eliminates the need for complex side locking of the slides. This simplifies the design with fewer components, saves space and in the end also saves valuable time. If a slide has to be moved independently from

read...
Logo
09.08.2019

Products

Meusburger presents innovations in the field of workshop equipment

In the middle of June, Meusburger expanded its workshop equipment product range with numerous innovations and additions in the machining, EDM accessories and clamping equipment product groups. Meusburger also has new products for measuring, lifting, and surface finishing. High

read...
Logo
09.08.2019

Products

Offset cutting punches at Meusburger

With the offset cutting punches from Meusburger there are many possibilities to configure the contour of cutting punches individually according to your needs. In addition, different materials and head shapes as well as coatings are available. These can be selected quickly and

read...
Logo
09.08.2019

Link

Logo
09.08.2019

Link

Logo
09.08.2019

Link

Logo
09.08.2019

Products

Standardised stamping and forming die sets for Bihler presses

A brand-new market innovation is now available from Austrian standard parts manufacturer Meusburger and German stamping and forming machine specialist Bihler. In a close cooperation between the two companies, the first standardised stamping and forming die sets were developed

read...
Logo
09.08.2019

Products

Cavity pressure measurement for increased process efficiency

According to the motto ‘everything from one source’, in addition to standard parts for temperature and end position control, Meusburger now also offers sensors for cavity pressure measurement. These are compatible with all piezoelectric pressure sensors as well as their compon

read...
Logo
09.08.2019

Products

The right plate for every project

At Meusburger, customers will not only find a very large selection of high-quality P-Standard plates, but also P-Special plates in variable dimensions and various versions. All plates are of course heat-treated for stress relief and machined to very tight tolerances. Thanks to

read...
Logo
09.08.2019

Products

A hot runner mould in just five minutes: with Meusburger, you can!

With the brand new Meusburger configurator for hot runner moulds a complete mould base including hot runner manifold can be customised with just a few clicks. The configurator offers highest flexibility, immediate creation of the 3D data and immediate price display. This world

read...
Logo
29.07.2019

Article

Large selection of materials

Visitors of the Meusburger booth will be shown the extensive selection of materials as well as standard elements specially for jigs and fixtures construction.

read...
Logo
16.07.2019

Article

Workshop equipment

Machining, EDM accessories and clamping equipment. With these additions, Meusburger expands its product range. New products for measuring, lifting, and surface finishing were also added.

read...
Logo
27.06.2019

Article

Stamping and forming die sets

Meusburger collaborated with Bihler to develop stamping and forming die sets for Bihler NC presses. Customers of both companies will benefit from this co-operation.

read...
Logo
25.06.2019

Article

Cavity pressure measurement increases process efficiency

Meusburger now offers two types of sensors, for direct and indirect cavity pressure measurement, which are compatible with all piezoelectric pressure sensors as well as their components.

read...
Logo
24.05.2019

Article

Moulding Expo 2019 impressions

Moulding Expo 2019 is almost over. During our visit to the expo, we managed to snap quite a few interesting pictures which we have compiled into a gallery for you.

read...
Logo
22.05.2019

Article

Offset cutting punches at Meusburger

With the offset cutting punches from Meusburger there are many possibilities to configure the contour of cutting punches individually according to your needs. In addition, different materials and head shapes as well as coatings are available. These can be selected quickly and eas...

read...
Logo
04.04.2019

Article

New Embossing Elements for Die Making

With the new embossing elements from Meusburger, stamped parts can be marked quickly and easily. On the one hand this serves for clear traceability of stamped parts, and on the other hand for visual monitoring of the correct machine parameters.

read...
Logo
02.04.2019

Article

Meusburger at Moulding Expo

Meusburger will be presenting several interesting additions to their portfolio. Additionally, other companies will be present at their stand to showcase technologies.

read...
Logo
26.03.2019

Article

Full house at Meusburger event

A recent event at Meusburger gave the participants from the industry an insight into current developments at the company as well as into the production of their standard parts.

read...
Logo
01.03.2019

Article

Sales increased in 2018

The Meusburger Group, headquartered in Wolfurt, finishes 2018 with a turnover of 308 million euros. The internationally leading manufacturer of high-quality products for the tool, mould and machine construction industry is thus recording an increase in turnover of around 6 percen...

read...
Logo
05.02.2019

Article

DLC coating

The new flat guiding stock by Meusburger promises better sliding properties thanks to DLC coating.

read...
Logo
14.01.2019

Article

DLC Coated Components as a Must-Have in Modern Die and Mould Making

Moving components without hard carbon coating (diamond-like carbon, or DLC for short) can hardly be imagined in modern die and mould making. But what is so good about this coating? Through examples, Meusburger shows the clear advantages and uses of DLC coated standard components.

read...
Logo
27.12.2018

Article

Austria: Components now available in stainless steel

Meusburger has expanded its product range especially in the temperature regulation components, ejectors, and demoulding product groups with numerous new stainless steel components.

read...
Logo
19.12.2018

Article

Components now available in stainless steel

Meusburger has expanded its product range especially in the temperature regulation components, ejectors, and demoulding product groups with numerous new stainless steel components.

read...
Logo
17.09.2018

Article

Mould and die-making services and components all from one group

Following the motto ‘everything from a single source’, the Meusburger Group, including PSG, WBI and the youngest group member, Segoni, will present new and tried-and-trusted products and services in the field of mould and die-making.

read...
Logo
08.08.2018

Article

Diamond-like carbon coating – Why it makes sense for mould components

The idea of moving components without hard carbon coating (diamond-like carbon, or DLC for short) is hard to imagine in modern die and mould-making. But what is so good about this coating? Four examples show the advantages and uses of DLC-coated standard components.

read...
Logo
09.07.2018

Article

Meusburger will be Taking Over Software Specialist Segoni

The mould component specialist Meusburger announced that it will take over the German company Segoni. Segoni develops ERP/PPS software and has a wide range of customers from the areas of mould and die construction.

read...
Logo
05.07.2018

Article

Meusburger will be taking over software specialist Segoni

Today, the mould component specialist Meusburger announced that it will take over the German company Segoni. According to the company, the software specialist will continue as an independent enterprise, and all employees will be retained.

read...
Logo
26.04.2018

Article

Compact cylinder for easy installation in small spaces

Cylinders – The compact and intelligent design of the E 7048 Build-in cylinder with flange from Meusburger enables its installation in very small spaces and thus allow for maximum mould design freedom.

read...
Logo
24.04.2018

Article

Simple and quick clamping system for die-making

After its success with the clamping system for mould-making, Meusburger has expanded its product portfolio with the H 3000, a clamping system particularly for die-making. Users benefit from the efficiency and repeatable accuracy by positioning, fixing and clamping workpieces in o...

read...