Logo
27.06.2018

Article

Applauding a Premiere

CastForge in Stuttgart, Germany, which recently ended after a three-day stint on 7 June, celebrated a successful premiere, the organisers, Messe Stuttgart reports. The trade fair grounds was the new meeting place for the industry of castings and forgings in the D-A-CH region.

read...
Logo
22.06.2018

Article

Applauding a premiere

Cast Forge in Stuttgart, Germany, which recently ended after a three-day stint on 7 June, celebrated a successful premiere, the organisers, Messe Stuttgart reports. The trade fair grounds was the new meeting place for the industry of castings and forgings in the D-A-CH region.

read...
Logo
19.06.2018

Article

AMB Iran 2018, the show to go on

Iran - The third edition of AMB Iran, leading industry fair for metalworking in Tehran, is still on course, its organisers Messe Stuttgart and the Association of German Machine Tool Manufacturers (VDW) say.

read...
Logo
13.06.2018

Article

This will change at Moulding Expo 2019

To inform exhibitors on the current state of the planning, the organisers of Moulding Expo have invited interested companies to a breakfast meeting in Stuttgart to give an update on the exhibition in 2019. And there will be some changes.

read...
Logo
23.04.2018

Article

New platform for buyers, planers, designers and developers in castings and forgings

Germany - The three-day premiere event, Cast Forge, at the Stuttgart Trade Fair Centre from 5-7 June 2018, will showcase a wide range of products, from minute components for fittings through to huge turbines.

read...
Logo
25.03.2018

Article

Bigger and better, thanks to show offerings and a strong economy

Metalworking show AMB, taking place in autumn this year, will have over 1,500 exhibitors presenting their developments and innovations on a floor space of more than 120,000 sq.m.

read...
Logo
15.02.2018

Article

Bigger and better, thanks to show offerings and a strong economy

Metalworking show AMB, taking place in autumn this year, will have over 1,500 exhibitors presenting their developments and innovations on a floor space of more than 120,000 sq.m.

read...
Logo
15.02.2018

Article

A good start and the right ingredients for success for Cast Forge

Germany - Organiser of the Cast Forge trade fair has just very happily announced the confirmation of the 100th exhibitor for the show. Happening for the first time, this event will focus primarily on castings, forgings and their machining.

read...
Logo
19.01.2018

Article

New line-up of AMB project team

Florian Schmitz, project manager at Messe Stuttgart, is a new member of the project team for AMB. He replaces Sabrina Sledzinski. For tool and mould-makers, Schmitz is known as one of the faces behind Moulding Expo.

read...
Logo
15.12.2017

Article

Positive feedback for new trade fair concept of Cast Forge

Messe Stuttgart has presented its concept for the new trade show Cast Forge at a get-together . According to the show organiser, the concept was met with a high level of acceptance. The trade fair is specifically addressed at castings, forgings and their machining.

read...
Logo
14.11.2017

Article

New Trade Fair for Casting and Forging

Messe Stuttgart has launched the trade fair Cast Forge. The starting date of the trade fair for casting and forging as well as the machines used in this industry will be on June 5, 2018 in Stuttgart.

read...
Logo
17.10.2017

Article

Digital Way at AMB 2018

At AMB 2018, digital will be given a special focus. "Digital Way" will be premiered at the show, concentrating on increasing digitalisation in production, along with the usual fair offerings at the metalworking international trade fair. Digital Way comprises a congress, an accomp...

read...
Logo
05.07.2017

Article

New concept to cater to exhibitor needs

Germany - With an expected 90,000 international visitors and 1,500 exhibitors expected at AMB 2018 in Stuttgart, which will take place from 18-22 September 2018, the additional exhibition space created by the new Paul Horn Hall (Hall 10) will provide new possibilities for AMB to ...

read...
Logo
03.07.2017

Article

Moulding Expo again successful

A month has passed since Moulding Expo 2017 opened its doors. In the meantime, the organisers of Messe Stuttgart published the end results: The trade fair records a slight increase since last year.

read...
Logo
08.06.2017

Article

Iran: AMB surpasses all expectations

With 5,736 trade visitors (2016: 2,027), 202 exhibitors (2016: 111) at the joint event by Messe Stuttgart and the German Machine Tool Builders' Association (VDW) in late May at the Shahr-e-Aftab Exhibition Centre in Tehran, AMB Iran outperformed its previous edition and expectati...

read...
Logo
07.06.2017

Article

AMB Iran surpasses all expectations

Iran - With 5,736 trade visitors (2016: 2,027), 202 exhibitors (2016: 111) at the joint event by Messe Stuttgart and the German Machine Tool Builders' Association (VDW) in late May at the Shahr-e-Aftab Exhibition Centre in Tehran, AMB Iran outperformed its previous edition and ex...

read...
Logo
16.05.2017

Article

“We have had a great and very successful start”

When Florian Niethammer and Florian Schmitz started organising Moulding Expo for the first time, they did it with the idea in mind to do it with the industry, for the industry. Two years later, it seems like they have arrived in the sector: 700 exhibitors are proof of that.

read...
Logo
11.05.2017

Article

Moulding Expo is about to start!

The tension increases: Moulding Expo 2017 is almost here. Two years have elapsed in which companies had time to develop new products and innovations. In only a few weeks, the halls in Stuttgart will open their doors to a trade fair "by the industry for the industry".

read...
Logo
05.05.2017

Article

Iran optimistic about the future

Iran – Technology transfer and training are currently the key topics in Iran's industry. Prior to AMB Iran in May, industry get-togethers in Isfahan, Teheran and Tabriz were set-up recently by the organisers.

read...
Logo
24.04.2017

Article

Innovative give-away to be presented during Moulding Expo

MEX 2017 – Anyone attending Moulding Expo in Stuttgart will be able to take home a very special memento: the "3-2-eat!“ eating utensil - developed by mechanical engineering students in cooperation with tool construction and mould making companies, and injection moulded under the ...

read...
Logo
29.03.2017

Article

Trade fair awards a scholarship for advanced training course

Messe Stuttgart responds to the demands of the innovation-conscious industry: The organisers of Moulding Expo will award a scholarship for an advanced training course.

read...
Logo
16.03.2017

Article

3D printing is everywhere

3D printing and additive manufacturing in general have found their way into all sorts of manufacturing processes. It is no wonder that 3D printing will play an important role at Moulding Expo 2017 too.

read...
Logo
15.03.2017

Article

Portugal: What happens when two winners meet

When you invite 50 journalists on a trip to Portugal, you are planning big. In this case Messe Stuttgart is preparing for this year's Moulding Expo. And so far, prospects are sunny.

read...
Logo
14.03.2017

Article

What happens when two winners meet

Portugal - When you invite 50 journalists on a trip to Portugal, you are planning big. In this case Messe Stuttgart is preparing for this year's Moulding Expo. And so far, prospects are sunny.

read...
Logo
14.02.2017

Article

Germany: Moulding Expo almost at Finish Line

This biannual fair is said to be expanding with improved quality including international associations as exhibitors and delegation visitors being at the show in Stuttgart, the organisers says.

read...
Logo
09.02.2017

Article

2017年伊朗德黑兰国际机床展览会(AMB Iran)将开设德国馆

主办方说,在2016年5月成功举办AMB Iran后,许多参展商已经预订了2017年AMB Iran(5月23日至26日)的展位。

read...
Logo
09.02.2017

Article

Moulding Expo almost at finish line

Germany - This biannual fair is said to be expanding with improved quality including international associations as exhibitors and delegation visitors being at the show in Stuttgart, the organisers says.

read...
Logo
30.01.2017

Article

AMB Iran 2017 to host a German pavilion

After a successful inaugural AMB Iran in May 2016, a large number of exhibitors have already booked their stands at AMB Iran 2017 (23 to 26 May), the organisers said.

read...
Logo
17.01.2017

Article

AMB Iran 2017 to host a German pavilion, promoted by BMWi

Iran/Germany – After a successful inaugural AMB Iran in May 2016, a large number of exhibitors have already booked their stands at AMB Iran 2017 (23 to 26 May), the organisers said.

read...
Logo
05.10.2016

Article

德国:人头攒动的展览馆

周围满是笑脸以及一个积极的氛围是一个成功展会的明显标志。9月13日至17日举行的2016年斯图加特金属加工博览会正是如此。

read...
Logo
29.09.2016

Article

Germany: Packed exhibition halls

Smiling faces all around and a very positive atmosphere are clear signs of a successful show. That was also the case for Stuttgart's metalworking show AMB 2016, held from 13 - 17 September.

read...
Logo
21.09.2016

Article

Packed exhibition halls

Germany – Smiling faces all around and a very positive atmosphere are clear signs of a successful show. That was also the case for Stuttgart's metalworking show AMB 2016, held from 13 - 17 September.

read...
Logo
12.09.2016

Article

German precision tool industry expects additional boost from AMB

Germany – The German precision tool industry is flying high. Last year, the industry again grew by 3% to achieve the record production value of €9.6bn. The precision tool manufacturers expect another boost from AMB and want to continue the upward trend at a moderate pace.

read...
Logo
30.08.2016

Article

The New Gold–Rush: European Component Manufacturers Tap Into Iranian Market

The market promises many things. For the first time after a 10-year embargo, the German manufacturers are again at a trade fair in Iran. Whether it is worth the pioneering spirit, will probably be revealed later.

read...
Logo
22.08.2016

Article

德国:机床走向数字化 —— 未来机床是怎样的呢?

多年来,机床的基本原理没有改变。如今,进入“工业4.0”的时代,实际上是 “网络作业”的另一个术语,机床必须走向数字化和交流化,亚琛工业大学Ing. Christian Brecher博士级教授说道。

read...
Logo
22.08.2016

Article

Germany: What will future machines look like?

The basic principle of machine tools has changed very little over the years. Now, in times of "Industry 4.0", actually only another term for "networking", the machine tool must be opened up to go digital and communicate says Prof. Dr.-Ing. Christian Brecher from RWTH Aachen Unive...

read...
Logo
19.08.2016

Article

Iranian perspective

The market promises many things. For the first time after a 10-year embargo, the German manufacturers are again at a trade fair in Iran. Whether it is worth the pioneering spirit, will probably be revealed later.

read...
Logo
10.08.2016

Article

Machine tools go digital: what will future machines look like?

Germany - The basic principle of machine tools has changed very little over the years. Now, in times of "Industry 4.0", actually only another term for "networking", the machine tool must be opened up to go digital and communicate says Prof. Dr.-Ing. Christian Brecher from RWTH Aa...

read...
Logo
01.08.2016

Article

德国:网络机床行业

机床在未来能否发展成为连接着纺锤的个人电脑?软件在未来是否能决定机器的成败?这些问题都将在AMB国际金属加工展览会上得到解答,展览会于2016年9月13日至17日在德国斯图加特举行。

read...
Logo
26.07.2016

Article

Germany: Networking machine tool industry

Will the machine tool develop to become a PC with a spindle, will software determine the success or failure of a machine? Answers to these questions will be provided at the upcoming AMB International Exhibition for Metalworking from 13 to 17 September 2016 in Stuttgart, Germany.

read...