Search

Tech Focus: Micro Moulding How to choose a micro moulding partner

| Author / Editor: Aaron Johnson / Steffen Donath

For companies that are exploring the possibilities of micro moulding, there are some seemingly daunting obstacles that exist, not least the vagaries of the micro moulding process itself.

Related Companies

This is a handy guide that illustrates the critical factors when choosing a partner for micro moulding.
This is a handy guide that illustrates the critical factors when choosing a partner for micro moulding.
(Source: Accumold)

Moulding at the micro scale renders redundant many of the “rules” associated with macro moulding, and the process requires a completely new perspective in terms of such considerations as rheology, tooling, gating, and handling and assembly to name but a few. Due to this, most OEMs that embark on a micro moulding product development process engage with specialist micro moulding experts that can navigate inherent issues, and through experience have honed the art of micro moulding to optimise manufacturing outcomes.

However, not all micro moulding companies are the same, and it is important to ensure that when short-listing your preferred suppliers, the correct questions are asked. Supplier selection is vital to ensure success in your micro product development endeavours, and this article will provide a guide to the questions to ask, and the answers to look out for.

Job shop vs. product development partner

It is perfectly acceptable when moulding larger-scale and non-critical components to treat your chosen sub-contract moulder as a job shop. You provide your files, receive a quote, press go, and your parts are delivered. Job done!

This should not ever be the case when choosing a micro moulder. Here the emphasis must be on establishing a relationship that sees your chosen moulder as a strategic partner in product development, and as such they should work with you from product inception through to ultimate mass manufacture, you and the micro moulder sharing intelligence and collaborating to ensure timely, cost-effective and — above all else — accurate outcomes.

As such, you should interrogate your short-listed micro moulder as to the ways that they work, analyse how transparent their processes are, and how much emphasis they place upon a truly collaborative relationship. The acid test here is not just how important this level of customer engagement is but also how obvious it is that the different departments within the micro moulder’s facility are also working together. Knitting together an effective product development process requires that design, tooling, moulding, validation, and assembly teams are all involved early and together.

Your chosen micro moulder should have a solutions-oriented focus, and a demonstrable reputation in the various industry sectors for high quality, timely and cost-effective results.

Vertical integration

Vertical integration is of huge importance when it comes to selecting a micro moulding partner. When you are working on product development projects where you need to think about the attainment of micron tolerances, the risk associated with outsourcing any part of the design to manufacturing process is too great. True vertical integration exhibits the ability to be able to support and control a product development program from end-to-end, control being central to success, as it removes the headaches of dealing with multiple vendors, and streamlines the entire product development process.

Supplier selection is vital to ensure success in your micro product development endeavours.
Supplier selection is vital to ensure success in your micro product development endeavours.
(Source: Accumold)

So saying, it is vital to check that your chosen micro moulding partner really has all aspects of the product development process in-house, and the only sure fire way of knowing this is to visit facilities and see for yourselves.

A key area that needs to be covered by any micro moulding partner is their ability to provide design and material assistance. Design for micro moulding is absolutely critical, and your chosen micro moulding expert should be able to intervene and optimise your design to ensure successful manufacturing outcomes. Without this ability, and without the ability to be able to advise as to the best materials for any given application, there is an increased chance that time and money will be lost due to the need for design re-iterations, and even more seriously the need to adapt hard tooling.

The key when embarking on a micro moulding project is to ensure that the design and the material used will work throughout the entire product development process, and your micro moulding partner should be able to ensure this, and also to enhance the innovative nature of your moulded parts by intelligent design input in the early stages of product development.

Next, your micro moulder needs to have the in-house ability to fabricate micro tools. Micro tooling is arguably the key enabling technology for any micro moulding project, and here you need to work with a moulder that has years of experience and has the necessary infrastructure to develop the required tool for your application. Outsourcing the production of micro tools can have a huge impact on the viability of a micro moulding project, as even the smallest slip in tolerances can have a huge impact on the attainment of exacting micron-level requirements in the finished part. As a customer, this is an area to focus on, and you need to see that your chosen micro moulder can demonstrate that in-house they can achieve the necessary micron-level tolerances when cutting steel.

It seems obvious that a micro moulder should be able to demonstrate their ability to mould, but here again the drivers behind success are experience and the moulding machines available in-house to undertake the production. You need to locate a micro moulder that can demonstrate a long track record of moulding to micro tolerances. As we have said before, moulding at this scale has its own set of rules and difficulties that can only be understood and navigated by a micro moulding company that has the right pedigree.

Also, it is important to get a feel for the micro moulding machines that are at the disposal of your chosen partner. Most micro moulders buy in micro moulding machines from third party suppliers, and while these are usually top-end solutions, unadapted, they all have various drawbacks and limitations. You will see that to overcome these issues, forward-looking and experienced micro moulders think outside the box and develop their own micro moulding machine solutions, which can achieve greater tolerances and throughput than off-the-shelf alternatives. It is certainly worth asking your chosen supplier to demonstrate the capabilities they have in this area.

Everyone no doubt aware of the homily, “if you can’t measure it, you can’t make it.” In fact this is not strictly true, because you can of course make it, but if you have the inability to measure it accurately then you have zero chance of proving design intent. With this in mind, your chosen micro moulder must be able to demonstrate a suite of top-end metrology solutions that can validate the design intent of your product. Having this facility in-house is also of vital concern, as even the change of environment from production facility to measuring facility can introduce changes in micro part geometry (maybe due to humidity and other variables) which will render validation protocols useless. In house metrology also needs to be seen in process as well as in the lab to ensure production efficiency.

Automated Assembly. Finally, make sure that your micro moulding partner has the capacity and ability to provide customised automated assembly in-house. When looking at the handling issues inherent with micro plastics parts, manual assembly is either impossible of hugely costly and time-consuming. Your chosen micro moulder must be able to demonstrate an understanding of — and experience in — the art and science of micro assembly, with a focus on minimising the level of handling, as at each stage tolerances can be affected.

Size and longevity

Moving on from the in-house capabilities that a micro moulding partner must be able to demonstrate, it is also important to get a feel for the scale of the moulding facilities and the length of time that your moulder has worked at the ultra-precision end of moulding.

It may sound counter-intuitive to say size matters when assessing a moulder that is aiming to reduce the size of your plastic parts and components, but there will come a time when you need to scale up to high volume mass manufacture, so you need to locate a micro moulding partner that has the physical space and infrastructure in place to cater for you medium- and long-term needs. Consider this when you visit the facilities of your chosen micro moulder. Do they have the physical space and infrastructure to develop a manufacturing cell for you that can produce multi-millions of parts?

Your chosen micro moulder should have a solutions-oriented focus, and a demonstrable reputation in the various industry sectors for high quality, timely and cost-effective results.
Your chosen micro moulder should have a solutions-oriented focus, and a demonstrable reputation in the various industry sectors for high quality, timely and cost-effective results.
(Source: Accumold)

Also, there is no substitute for experience, and this comes through a long association with micro moulding and micro product development. True precision micro moulding, really being able to make tiny products or larger products with micron features has only really been possible as we understand it today since the 1980s. On that basis, err towards a company that can show you at least three decade of experience in the niche, rather than one with a handful of years under their belt.

Certification

Many end use micro moulded products end up in safety critical applications, and so it is important (and sometimes vital) to be able to show that the product development process and manufacture of the relevant parts and components were undertaken with a micro moulding partner that can demonstrate adherence to the necessary standards such as ISO 13485, ISO 9001 and ISO 14001. Just ask for reassurance here before going too far down the supplier selection road, as this could be a deal breaker.

Summary

Not all micro moulders are the same, even if their customer-facing profiles look the same. Micro moulding projects are often highly strategic, highly complex, and also expensive, so it is vital that you take a proper look under the hood of your short-listed supplier before committing one way or the other. Only through careful supplier selection can you ensure that you are working with a micro moulding partner that has the capabilities and values you need to ensure optimal manufacturing outcomes.

Aaron Johnson is the VP of Marketing and Customer Strategy at Accumold.

(ID:46387233)