Logo
21.10.2018

Article

Günther invests in a successful future

Günther Hot Runner Technology has plenty of reasons to celebrate. Firstly, the company has been founded exactly 35 years ago. Secondly, the expansion and renovation of the company's headquarters in Frankenberg, Germany, have been completed.

read...
Logo
24.09.2018

Article

Achieving homogeneous temperature control beyond the nozzles

Möller-Flex is a specialist for flexible plastics and products made of several materials. As its hot runner system supplier, the injection moulding company has chosen Günther because the hot runner nozzles meet their requirements for a constant temperature in an outstanding manne...

read...
Logo
30.08.2018

Article

Hot runner specialist offers application solutions for plastics processing

Leading hot runner technology company, Günther Heisskanaltechnik, will present its broad selection of innovative hot runner nozzles and systems for the plastics industry at Fakuma.

read...
Logo
07.09.2017

Article

Outstanding service and quality at the core of the company

Günther Hot Runner Technology is known to most toolmakers. Even though the company has a sales and service network all over the world today, the company still manufactures exclusively in Germany. ETMM spoke with Managing Director Siegrid Sommer and Head of Sales and Technical Con...

read...
Logo
22.03.2017

Article

Small, but special

Germany – Sometimes less is more. In the case of WFB, a German tool and mould making trade fair, exhibitors were very satisfied with their success even after only half a day.

read...
Logo
09.01.2017

Article

Hot runners to the fore in production of writing instruments

Germany – For 70 years, Wernigerode-based company Schneider has been producing high-quality writing instruments. The company’s continued success today, which includes the production of 80 million ink cartridge cases each year, involves systems from Günther Hot-Runner Technology.

read...
Logo
05.12.2016

Article

German hot runner specialist to invest €5m in the future

Germany – At its International Agents’ Meeting, Günther Hot Runner Technology announced its plans to invest €5m in new technological developments, state-of-the-art machinery and further expansion of its headquarters in Frankenberg, Germany.

read...
Logo
14.11.2016

Article

Direct side gating in compact, multi-cavity moulds

Germany - Günther Heisskanaltechnik's Okta Flow type OMT multi-tip hot-runner nozzle was designed for the direct side gating of products in compact, multi-cavity moulds. According to the company, there are said to be a variety of unique selling points setting it apart from the co...

read...
Logo
03.10.2016

Article

Direct side gating in compact, multi-cavity moulds

Germany - Günther Heisskanaltechnik presented its Okta Flow multi-tip nozzle for side gating at the recent K-Show in Düsseldorf. According to the company, there are said to be a variety of unique selling points setting it apart from the competition.

read...
Logo
02.05.2016

Article

A showcase for state-of-the-art valve gate technology

Poland/Germany – Hot runner technology specialist Günther Heisskanaltechnik will be showcasing its valve gate technology at the upcoming Plastpol 2016 in Kielce, Poland.

read...
Logo
23.03.2015

Article

Advanced hot runner systems for hybrid kitchen fittings

Technology that can stand the heat: A Solingen, Germany-based injection mould company transformed their high-temperature polymer production by implementing an advanced hot runner system for the production of complex hybrid components.

read...
Logo
13.10.2014

Article

October Issue Photo Gallery

A look at some of the latest advancements from a recent edition.

read...
Logo
30.09.2014

Article

Slim, long hot runner nozzles join company’s signature line

Günther Heisskanaltechnik has extended its portfolio of Blue Flow hot-runner nozzles. A series of slim and long nozzles with a melt-channel diameter of 3mm and a length of up to 180mm rounds off the standard range.

read...
Logo
13.11.2012

Article

Systems for tough materials can save energy

The products can also provide higher quality and more design freedom.

read...
Logo
26.10.2012

Article

Four components for injection moulding include an elastomer

A range of hot runners designed by Günther Heisskanaltechnik allows a processor to make producing a complicated everyday item look easy.

read...
Logo
10.10.2012

Article

Hot runners refine metal and ceramic injection moulding

Jörg Essinger, head of application technology at Günther Heisskanaltechnik, explains how hot runners can improve the process and cut waste when turning harder materials embedded in plastics into finished products.

read...
Logo
27.06.2012

Article

Günther conference attracts range of guests, lecturers

More than 200 toolmakers, plastics processors and other technologists descended on the bucolic Hessian hamlet of Frankenberg to learn more about hot runners, tool and mould materials and a range of other subjects during a two-day conference at Günther Heisskanaltechnik.

read...
Logo
09.05.2012

Article

Hot runner engineering for all-electric injection moulding

Günther’s complete hot runner solutions promote energy efficiency and provide a technological basis for cleanroom applications.

read...
Logo
02.05.2012

Article

Günther to hold expert days on mould and hot runner technology in June

Günther Heisskanaltechnik GmbH has organised the programme for its expert days on mould and hot runner technology to be offered on 12 and 13 June in Frankenberg, Germany. Topics on the agenda include systems for medical technology.

read...
Logo
09.03.2012

Article

Hot Runner with Servomotor for Moulding Efficiency

Hot runner engineering influences the design, construction, efficiency and costs of heavy-duty injection moulding tools. At Medtec, in an exhibit at the Arburg stand, Günther Heisskanaltechnik presents an efficient hot runner system with electrically driven valve-gate nozzles tha...

read...