Hot Runners Greater productivity in tool and mould making through standardisation

Editor: Charles Butcher

Standardised high-quality mould units provide a reliable basis for modern mould- and toolmaking. This was reason enough for Schoform, a German mould and toolmaking company based in eastern Saxony, to opt for standard mould units from Hasco for the last 20 years. The latest example is a 32-cavity hot runner mould, for which Hasco supplied the complete, ready-to-assemble “hot half” as well as most of the associated standardised components.

Related Vendors

An example of a standardised mould with accessories.
An example of a standardised mould with accessories.
(Source: Hasco)

Since 2002, Schoform, which is based in Demitz-Thumitz near Bautzen/Germany, has been building and supplying injection moulding tools for thermoplastics and thermosets as well as compression moulds for thermosets. With a workforce of 21, the company produces around 50 moulding tools a year for customers in electrical engineering, electrical installation and the automotive industry.

Schoform has so far been able to cope well with the special challenges of the coronavirus crisis, and is seeing renewed demand for its thermoset products. “Not many companies nowadays have them in their portfolio,” says managing shareholder Dirk Scholze. “The field was in constant decline a few years ago, but is now coming back strongly again.”

From the very beginning, Schoform has opted for standard mould units from Hasco, the Lüdenscheid/Germany-based full service provider of standardised quality mould units. “We have enjoyed very good cooperation with Hasco for many years,” says managing director Alexander Thiel, a mechanical engineer who started with Schoform as a construction engineer in 2002. He is firmly convinced of Hasco’s value as a trusted supplier: “Whether we are talking about standard mould units or customised components, the quality of the products is always outstanding.”

Gallery with 7 images

32-cavity hot-runner mould is one of the most complex recent jobs

One of the largest and most complex projects that Schoform has handled recently is a 32-cavity hot runner mould with needle valve for producing elastic inserts from a TPE material. The customer, Schneider Electric, uses the inserts to seal the cable conduit in wall-mounted electrical junction boxes. The moulding tool is designed for 24/7 operation and guarantees at least a million shots.

In Hasco, Schoform again found a partner that was able to cover the entire spectrum of services, not only in an advisory capacity and in initial system design, but also in technical coordination during mould design and then in the production and special processing. “And Hasco delivered that with a cost/benefit/quality ratio that other suppliers were unable to match,” says Alexander Thiel. “We were particularly fortunate that we, as a mould and tool manufacturer, were able to pass on to Hasco a good deal of the responsibility for technical communication with the customer.”

In this respect, Alexander Thiel adds, there was an intensive exchange of ideas and experience between the Hasco technical service department and Schneider Electric, which reinforced the customer’s decision to order the mould from Schoform. An important point in the entire decision-making process was also that Hasco was able to offer and supply the hot half with the relevant guarantees.

Finally, the mould was then made up from 95 percent Hasco components, from the ready-drilled K-plates and broad range of Z-standards to the DLC-coated ejector elements that ensure a long service life for the finished mould. In addition, Hasco’s online Mould Base Assistant is an enormous help at the design stage: “A super-tool,” says Alexander Thiel, “simple and intuitive to operate. And you always have the latest available standard units to hand.”

With such support, Schoform was able to concentrate on its strengths and carry out the precision machining in its own modern machinery pool. “We merely provided support through machining steps such as deep-hole drilling in Hasco’s Special Machining Center (SMC) without competing with the customer,” said Stephan Wendt, Mould Base technical sales engineer.

Schoform also took advantage of a number of components offered exclusively by Hasco. For example, the Z9675 diverting plug enables the conformal positioning of cooling holes in areas where ejectors are located, to provide significantly more effective temperature control.

Smooth assembly and commissioning

The complete hot half was supplied as a ready-to-mount subassembly with the support of Tobias Kröber, a technical sales engineer in Hasco’s hot runner department. It is compatible with all other components in the Hasco range. “For us, this made everything extremely easy in terms of the assembly and coordination,” says Alexander Thiel. “Here again, the precision, execution and timing were outstanding. As far as the assembly was concerned, we couldn’t have imagined anything better.”

“In the collaboration with Hasco on this mould project, everything ran absolutely smoothly,” Alexander Thiel continues. “Even during the very first phase, things all worked out perfectly: the production time for the hot runner, exact adherence to the delivery times for all the standard mould units — which made it possible to deliver the mould absolutely on time — and the quality of the produced parts.” Hasco’s technical application department was also present at the sampling stage, and provided advice for startup and finding the optimum machine parameters. “We were quickly able to go direct from the first sampling to the approval and release of the mould,” says Alexander Thiel proudly. “After only a short time, nothing but good parts were coming out of the machine.”

Standardised mould units optimise added value

Schoform tries to build as much as possible on the basis of standardised Hasco mould units, not least because of the ease of obtaining spare parts. Another reason for continued cooperation with Hasco, says Alexander Thiel, is the ability to stay up to date whenever technical innovations come about. Finally, for Schoform, standardisation is a fundamental requirement nowadays to remain permanently competitive in a world with ever faster change and increasing digitalisation.

Maximum productivity is a key success factor in view of the increasing competitive pressure, and especially in economically difficult times. Standardised mould units for mouldmaking guarantee sustainable success because, when used consistently, they optimise the entire process chain. This begins at the development stage, where native CAD data from standard elements with installation spaces can easily be implemented into the design through simple drag-and-drop. “With the ready-to-assemble coordinated standard mould units, we save a considerable amount of assembly time,” Alexander Thiel explains.

Gallery with 7 images

Additional synergies come about through the standardisation in machining and assembly, because the required tools can be reduced to an absolute minimum. Apart from these time and cost benefits, the use of standardised construction elements also accelerates the time to market, which for many new developments is of fundamental importance. In plastics processing, standard units that have proven themselves thousands of times guarantee maximum safety and reliability in production.

During a scheduled maintenance turnaround, or in the event of wear and tear or a defect, the standardised mould units can be repaired quickly, thus cutting downtime to a minimum.

Schoform increases its productivity

Schoform managing shareholder Dirk Scholze says: “The orders for moulding tools we receive here in the easternmost point of Germany generally involve very demanding and complex projects. They entail a comparatively large amount of coordination, so our excellent cooperation with Hasco makes it possible for us to meet the customers’ stringent requirements.”

This mould for TPE components in a junction box is only one example of Schoform’s many products for the electrical installation segment. The company also supplies sophisticated injection moulding tools for the automotive industry, although Alexander Thiel says this segment has become very much quieter in recent years. “We used to have mainly orders for diesel components,” adds Dirk Scholze, “including charge air pipes and Adblue filling systems. The trend now, of course, is towards alternative propulsion systems such as electric vehicles.” The company’s automotive portfolio now also includes moulds for interior components such as window handles and door liners. It also often happens that Schoform helps customers design their applications to suit the mould.

Full service provider for mouldmaking

With more than 100,000 products under one roof, Hasco is a full service provider for mould and toolmaking. Its portfolio of high-quality standard mould units, built up according to a modular system and perfectly coordinated to the needs of the customers, increases its competitiveness on a lasting basis. One of Hasco’s basic principles is to offer not as much as possible but as much as necessary. To make it easy for customers to build high-quality moulds, Hasco supplies the right product and material combination for every application.

Additional Information
Interview with the Hasco sales team: Tobias Kroeber and Stephan Wendt
Standardisation and individualisation for customer benefit

Hasco is a company with a long tradition. Can you give the readers a brief history of the firm?

At the beginning of every success story is a basic idea. Hasco’s idea is to offer mouldmakers the best possible support. For this, we developed the standard mould base. Since we invented and patented a modular system of standard mould units in 1960, this has made us the pioneer for standardisation in modern mouldmaking. Since the company was founded in 1924 in Lüden­scheid, Germany, Hasco has become the leading international supplier of modular standardised components and accessories and individually designed hot runner systems. With more than 100,000 products, we offer innovative and cost-efficient solutions for designers, mouldmakers and injection moulders from a single source. Worldwide, our more than 700 employees at 35 locations enable our customers to build moulds in the easiest possible way.

What special services do you offer your customers?

From the initial idea right through to production, we support our customers with numerous user-friendly tools and innovative services. The Hasco portal gives rapid and simple access to detailed information on all our products. The technical data of the more than 100,000 quality standard mould units and the corresponding 3D datasets for the design and construction can be called up there at any time. Through the many additional benefits of the data — such as the installation spaces — our customers gain considerable time and cost savings along the entire mouldmaking value chain. As a reliable and competent partner, we were able to convince Schoform that we cover the entire service spectrum, from consulting and design through to the technical coordination during construction, plus the actual manufacture and special processing.

How do you master the challenges of today?

Mouldmakers have to meet a wide variety of demands. The constantly increasing time and cost pressure is well enough known, but fresh challenges are constantly arising. Established business models must develop further with the ever faster disruptive change. Especially in these difficult times, it’s very important to have a reliable partner for standard mould units at your side — a partner who offers a product range perfectly coordinated to the customer’s needs. Hasco supplies exactly the products that are needed to be able to build high-quality moulds and tools quickly and efficiently. With more than 100,000 products, Hasco is the most reliable full-service provider for mouldmaking and supplies its customers from a single source. With a modular structured standard mould unit portfolio geared precisely to the customer’s requirements, we offer a reliable basis for high-quality moulds, so we enable our customers to achieve sustainable competitiveness.

How were you able to support the Schoform project?

Together with our customer, we produced this complex 32-cavity hot runner mould with needle valve for the production of elastic inserts for the cable conduit in wall-mounted junction boxes. The mould was made 95 percent from Hasco components, starting with the ready-drilled K-plates and broad range of Z-standards to the DLC-coated ejector elements, ensuring a long service life for the mould. The hot half was supplied as a ready-to-mount sub-assembly.
Schoform has relied for nearly 20 years on Hasco’s quality, reliability and service. We are certainly very proud of this constructive partnership.

Subscribe to the newsletter now

Don't Miss out on Our Best Content

By clicking on „Subscribe to Newsletter“ I agree to the processing and use of my data according to the consent form (please expand for details) and accept the Terms of Use. For more information, please see our Privacy Policy.

Unfold for details of your consent