:quality(80)/images.vogel.de/vogelonline/bdb/1877900/1877956/original.jpg "Toyoda Gosei is increasing its interior/exterior part production capacity in the US.")
:quality(80)/images.vogel.de/vogelonline/bdb/1875100/1875111/original.jpg "Protolabs is a digital manufacturing source for custom prototypes and low-volume production parts.")
:quality(80)/images.vogel.de/vogelonline/bdb/1875000/1875020/original.jpg "Wematter Gravity is an SLS 3D-printing platform for additive manufacturing.")
:quality(80)/images.vogel.de/vogelonline/bdb/1874600/1874625/original.jpg "Aidro, based in Italy, is a pioneer in the volume production of next-generation hydraulic and fluid power systems through metal additive manufacturing (AM) across a wide range of industries.")
:quality(80)/images.vogel.de/vogelonline/bdb/1877300/1877381/original.jpg "“Hello, new EMO Hannover!” is the greeting that was shared at the EMO Hannover Relaunch Conference in the hybrid event hub “H’UP” on the Hannover Messe trade fair grounds.")
:quality(80)/images.vogel.de/vogelonline/bdb/1874300/1874329/original.jpg)
:quality(80)/images.vogel.de/vogelonline/bdb/1871700/1871780/original.jpg "Intelect including an LSR package for elastomer injection moulding.")
:quality(80)/images.vogel.de/vogelonline/bdb/1869200/1869231/original.jpg "With the myOerlikon service portal, Oerlikon customers across the globe have access to all machine and sales documents, drawings and operating instructions.")
:quality(80)/images.vogel.de/vogelonline/bdb/1859100/1859105/original.jpg "Leader Fial’s extensive new steady rest range will be launched at EMO Milan 2021.")
:quality(80)/images.vogel.de/vogelonline/bdb/1857200/1857215/original.jpg "For rotary tables used in highly dynamic machining centers, Schaeffler offers high-performing ranges of bearings, including variants with integrated angle measuring systems and direct drives (shown here: YRTCMA rotary table bearing with integrated angle measuring system).")
:quality(80)/images.vogel.de/vogelonline/bdb/1856900/1856931/original.jpg "Efficient die or mould handling throughout the entire process chain: rack systems and changing carts are equipped with a uniform docking system to transport dies or moulds safely.")
:quality(80)/images.vogel.de/vogelonline/bdb/1854000/1854037/original.jpg "The system compression spring wizard from Meusburger simplifies the design process.")
:quality(80)/images.vogel.de/vogelonline/bdb/1877400/1877414/original.jpg "With Codemeter, Wibu-Systems is offering a secure and long-established system that can handle all digital value chains in additive manufacturing.")
:quality(80)/images.vogel.de/vogelonline/bdb/1877300/1877373/original.jpg "CEM-E2 extruder for the 3D CEM process: Higher building speeds and improved component quality.")
:quality(80)/images.vogel.de/vogelonline/bdb/1877300/1877382/original.jpg "The HN800-V is built with the rigidity and accuracy necessary to perform ultra-precise contour machining and boring of components with critical tolerances.")
:quality(80)/images.vogel.de/vogelonline/bdb/1877300/1877380/original.jpg "The Robo Challenge team.")
:quality(80)/images.vogel.de/vogelonline/bdb/1869200/1869242/original.jpg "The HCN-6800 NEO with Yamazaki Mazak’s flagship Palletech automation system, which will be on display at EMO 2021.")
:quality(80)/images.vogel.de/vogelonline/bdb/1869100/1869168/original.jpg "Since 2020 the Innerbichler shop runs a Kern Micro HD and machines — if necessary around the clock and two shifts without operators.")
:quality(80)/images.vogel.de/vogelonline/bdb/1869500/1869567/original.jpg "Multiaxis CNC programming expands almost any shop’s productivity. But savvy users can maximize their multiaxis proficiency by diving into five crucial concepts.")
:quality(80)/images.vogel.de/vogelonline/bdb/1874000/1874076/original.jpg "Hypermill in action at SRD.")
:quality(80)/images.vogel.de/vogelonline/bdb/1869200/1869241/original.jpg "The new Sigmasoft release allows users a more accurate prediction and analysis of warpage.")
:quality(80)/images.vogel.de/vogelonline/bdb/1868300/1868366/original.jpg "The Hypermill Virtual Machining Optimizer automatically generates the optimal path between two operations.")
:quality(80)/images.vogel.de/vogelonline/bdb/1877100/1877199/original.jpg "Elmet will be presenting its new Smartmix Top 7000 Pro LSR dosing system at Fakuma 2021.")
:quality(80)/images.vogel.de/vogelonline/bdb/1871800/1871857/original.jpg "Hasco will be presenting new developments and additions to existing product ranges, together with user-friendly tools, CAD features and digital services at Fakuma.")
:quality(80)/images.vogel.de/vogelonline/bdb/1871700/1871779/original.jpg "This webinar focuses on Integrated OEM System's (machines, hot runners, moulds & controllers) ability to reduce cost associated with wastage while ensuring performance.")
:quality(80)/images.vogel.de/vogelonline/bdb/1871700/1871777/original.jpg "The smart Control dashboard provides information on the current system performance at a glance.")
:quality(80)/images.vogel.de/vogelonline/bdb/1877100/1877105/original.jpg "The Intelligent Spark Protection System (ISPS) can automatically control and adapt the cutting parameters of a wire-cutting EDM machine, ensuring an improved, safe cutting process without wire breakage.")
:quality(80)/images.vogel.de/vogelonline/bdb/1877600/1877654/original.jpg "Contaminated or dirty dielectric fluid can negatively affect the Electrical Discharge Machining process causing problems such as slower cutting speeds, metal removal rate and lower quality and rejected parts that fail quality control.")
:quality(80)/images.vogel.de/vogelonline/bdb/1862900/1862971/original.jpg "One of the Mitsubishi machines in action at N&E Precision.")
:quality(80)/images.vogel.de/vogelonline/bdb/1866700/1866738/original.jpg "Makino’s EDAC1 is capable of producing corner radii of 0.00019 inches (0.005mm) and surface-finish quality of 0.000024 inches (0.6 micron) Ry, while providing repeatability in the submicron range.")
:quality(80)/images.vogel.de/vogelonline/bdb/1866500/1866554/original.jpg "With the Tomo Scope XS FOV 500 it is possible to measure multiple workpieces in one operation.")
:quality(80)/images.vogel.de/vogelonline/bdb/1867000/1867029/original.jpg "Zinkteknik achieved a zero-defect zinc die casting production of safety critical automotive parts with the help of test automation systems from Kistler.")
:quality(80)/images.vogel.de/vogelonline/bdb/1862500/1862574/original.jpg "A joint project from Porsche, Mahle and Trumpf, in cooperation with Zeiss, has successfully 3D-printed pistons for the high-performance engine of Porsche's top-of-the-line 911 model: the GT2 RS.")
:quality(80)/images.vogel.de/vogelonline/bdb/1850400/1850479/original.jpg "One of the world’s fastest digital manufacturers has launched a Critical to Quality (CTQ) inspection service for its on-demand injection moulding.")
:quality(80)/images.vogel.de/vogelonline/bdb/1871700/1871782/original.jpg "Knarr supplies plates made of Toolox 33 and Toolox 44. With the right drill from precision tool manufacturer Gühring, the holes in this material can be drilled in a very uncomplicated and process-reliable manner.")
:quality(80)/images.vogel.de/vogelonline/bdb/1869900/1869965/original.jpg "Hyfore has introduced ultrasonic toolholders designed for machining hard materials.")
:quality(80)/images.vogel.de/vogelonline/bdb/1869200/1869243/original.jpg "Aerotech supplies complete solutions for optical alignment and adjustment from a single source, such as the Fiber MaxHP photonic alignment platform for optoelectronics. On display for the first time at the trade fair with the latest Automation1 control software.")
:quality(80)/images.vogel.de/vogelonline/bdb/1865400/1865435/original.jpg "Renishaw is previewing its RMI-QE next-generation radio transmission system for probing on machine tools.")
:quality(80)/images.vogel.de/vogelonline/bdb/1864700/1864749/original.jpg "ASK Chemicals launched cut inoculants with tighter tolerances and higher specificity.")
:quality(80)/images.vogel.de/vogelonline/bdb/1864300/1864377/original.jpg "Ecoclean's complete range of system and process technologies offers technical and economical solutions for every cleaning task.")
:quality(80)/images.vogel.de/vogelonline/bdb/1856900/1856946/original.jpg "Professional die body cleaning carried out by Oerlikon Neumag restores items virtually to their original state.")
:quality(80)/images.vogel.de/vogelonline/bdb/1855100/1855140/original.jpg "Arburg and Leonhard Kurz achieve gentle handling of surface-decorated washing machine panels. The handling is carried out by a linear robot system of the type Multilift V 40 from Arburg.")
:quality(80)/images.vogel.de/vogelonline/bdb/1875000/1875079/original.jpg)
:quality(80)/images.vogel.de/vogelonline/bdb/1874200/1874212/original.jpg "With its simulation tools, Lanxess is able to accurately predict the maximum stresses hollow-profile hybrids — such as automotive cross car beams (left-hand screen) — will withstand and at what point they will fail.")
:quality(80)/images.vogel.de/vogelonline/bdb/1872200/1872277/original.jpg "The FZero has just one seat, has more than 1,000 hp, and is said to make Formula 1 speeds possible for amateur racers.")
:quality(80)/images.vogel.de/vogelonline/bdb/1871700/1871787/original.jpg "Design of the roof frames allows weight reduction while improving production processes.")
Additive Technologies Formnext to host 3D printing challenge
Germany – The finalists of the purmundus challenge 2016, the international competition for design in 3D printing, will be announced at this year's Formnext exhibition, the international show on 3D printing, tool and mould making and future manufacturing technologies, held from 15 to 18 November in Frankfurt, Germany.
Related Companies
:fill(fff,0)/p7i.vogel.de/companies/60/1d/601d0e8bbf0ab/creaform-ametek-400x200.jpg "Creaform-AMETEK_400x200.jpg")
(Source: Schulz)
Since 2012, the purmundus label has been inviting designers, engineers and programmers to explore new paths in additive manufacturing by taking part in the ‘purmundus challenge’. Themed “3D Printing for the Mobile Individual”, the 2016 purmundus challenge will be recognising the most forward-thinking product ideas at Formnext. A special showcase and an award ceremony will be held on 17 November. Graphic artists, architects, mathematicians, engineers, and programmers are requested to submit their entries by 30 September 2016.
(ID:44048858)
:quality(80)/images.vogel.de/vogelonline/bdb/1767900/1767913/original.jpg "Moorehuhn Bike wins first prize at Formnext Connect.")
:quality(80)/images.vogel.de/vogelonline/bdb/1768600/1768621/original.jpg "Formnext Connect 2020")