EMO 2019 / Industrial Tooling Corporation (ITC)

EMO debut for UK company

| Editor: Steffen Donath

Industrial Tooling Corporation (ITC) will be making its exhibition debut at this year’s EMO show in Hannover.
Industrial Tooling Corporation (ITC) will be making its exhibition debut at this year’s EMO show in Hannover. (Source: ITC)

ITC will attend EMO for the first time this year. The company is looking to widen their reach and advertise their new milling range in Hannover in September.

On Stand F47 in Hall 5, the round tooling company will be looking to add to its existing network of European distributors whilst introducing the latest additions its trochoidal milling range.

The company will introduce their 5021 Series of 5-flute end mills that are available with a square-end and now also a complete range of corner radii. This Cupro coated long length end mill with a harmonic flute geometry for improved chip evacuation and extended tool life is available from 3 to 25 mm diameter with an overall length from 58 to 150 mm and a flute length from 9 to 40 mm.

The composition of the 5021 Series makes it the tool of choice for machining steel and exotic materials that inherently increase the temperature and stress on the cutting tool, according to the company.

Completing the latest line-up of 5-flute innovations is the new 5041 Series that has been introduced to provide manufacturers with extended reach when machining challenging materials.

The solid carbide end mills are manufactured from a micro-grain carbide substrate with ITC’s Cupro coating technology that dissipates heat, prolongs tool life and consistency; providing a robust platform for high-performance machining of deep pockets and cavities.

From the 6-flute trochoidal milling stable, ITC will be giving an EMO exhibition premiere to the new 6051 Series. With the choice of a square-end or multiple corner radii, the long-length centre cutting range has a harmonic fluting design that cuts through steel and exotic materials with ease. This new development is supported by the 6011-F, 6021-F and 6031-F with countless other ranges suitable for trochoidal machining.

Plasma cutting - Function, advantages and disadvantages

Cutting Tools

Plasma cutting - Function, advantages and disadvantages

25/06/2019 - Workpieces made of electrically conductive materials are cut through by using an accelerated jet of hot plasma. It is an effective way to cut thick sheet metal. read...

Comments are being loaded ....

Leave a comment

The comment is checked by an editor and will be released soon.

Discuss anonymously or log in Log In

Avatar
To protect our interests, we store the IP address in addition to the above information. This is solely for the purpose of identifying you as the author of the comment. The legal basis is the protection of legitimate interests in accordance with Art. 6 para. 1 lit. f) DSGVO.
  1. Avatar
    Avatar
    Edited by at
    Edited by at
    1. Avatar
      Avatar
      Edited by at
      Edited by at

Comments are being loaded ....

Report comment

Kommentar Freigeben

Der untenstehende Text wird an den Kommentator gesendet, falls dieser eine Email-hinterlegt hat.

Freigabe entfernen

Der untenstehende Text wird an den Kommentator gesendet, falls dieser eine Email-hinterlegt hat.

copyright

This article is protected by copyright. You want to use it for your own purpose? Infos can be found under www.mycontentfactory.de (ID: 46056666 / Cutting Tools)