Meusburger

Compact cylinder for easy installation in small spaces

| Editor: Briggette Jaya

The compact E7048 Build-in cylinder with flange is available in four sizes.
The compact E7048 Build-in cylinder with flange is available in four sizes. (Source: Meusburger)

Cylinders – The compact and intelligent design of the E 7048 Build-in cylinder with flange from Meusburger enables its installation in very small spaces and thus allow for maximum mould design freedom.

Meusburger offers the option of a surface or flush installation for its new E 7048 Build-in cylinder with flange.

According to the leading manufacturer in the field of high-precision standard parts, a two-step hole in the plate facilitates the installation and helps prevent damage to the seal of the O-ring from the transverse hole. Double-sealed piston rods with additional rod wipers ensure clean operation, in which the standard FKM (Viton) seal enables operation temperatures of up to 180°C.

The compact E7048 Build-in cylinder with flange is is supplied with screws.
The compact E7048 Build-in cylinder with flange is is supplied with screws. (Source: Meusburger)

Moreover, the hardened and ground piston rod offers optimal protection to enable long service life. The cylinder can be removed quickly and easily by means of a pull-off thread.

The new E 7048 Build-in cylinder with flange is supplied with screws and is available in four sizes, each with three different strokes. The CAD data is also available for download on the company's website within its digital catalogues.

Producing the ideal material for making a mould base

Meusburger

Producing the ideal material for making a mould base

03/07/2018 - The decision for a mould base is a crucial factor in mould production. If the material has not been treated correctly, it can lead to deformation. Additionally, standardised and well-prepared mould bases already have the correct size and all the necessary holes. read...

Comments are being loaded ....

Leave a comment

The comment is checked by an editor and will be released soon.

Discuss anonymously or log in Log In

Avatar
To protect our interests, we store the IP address in addition to the above information. This is solely for the purpose of identifying you as the author of the comment. The legal basis is the protection of legitimate interests in accordance with Art. 6 para. 1 lit. f) DSGVO.
  1. Avatar
    Avatar
    Edited by at
    Edited by at
    1. Avatar
      Avatar
      Edited by at
      Edited by at

Comments are being loaded ....

Report comment

Kommentar Freigeben

Der untenstehende Text wird an den Kommentator gesendet, falls dieser eine Email-hinterlegt hat.

Freigabe entfernen

Der untenstehende Text wird an den Kommentator gesendet, falls dieser eine Email-hinterlegt hat.

copyright

This article is protected by copyright. You want to use it for your own purpose? Infos can be found under www.mycontentfactory.de (ID: 45273449 / Components)