Taegutec

Centenarian company returns with new lines

| Editor: Barbara Schulz

The indexible drill head of the new Drill Rush line.
The indexible drill head of the new Drill Rush line. (Source: Taegutec)

Korea – In its centenary year, Taegutec will return to Mach after a 10-year absence.

The company will mark its return with the presentation of its new Drill Rush line, its “marquee” indexible head drilling line. This line is available in diameters ranging from 6 to 25.9 mm, with most variants in 0.1 mm increments.

According to the company, the characteristics of the Drill Rush eliminate the need for pecking cycles which help to reduce cycle times. It is available in shank diameters of 12, 16, 20, 25 and 32 mm; this is said to help boost rigidity when conducting high speed drilling on aluminum and non-metallic materials through to steel, iron-hardened steel and high temperature alloys. The indexible heads are available in appropriate sizes and geometries for the respective materials.

Taegutec has also introduced a line of flat-bottom inserts available in diameters from 8 to 25.5 mm in 0.5 mm increments, for drilling flat bottomed holes. This series complements the recently launched double-margin indexible heads. The new drill heads which are available with its latest Goldrush TT9080 insert grade, the company adds, provide surface finishes above Ra 1.6 µm.

Other exhibits include the new 12XD drills. They have polished flutes, through coolant and a wide chip gullet with an optimised geometry and is intended to rapidly evacuate swarf from the drill point for rigid and accurate drilling of holes.

Comments are being loaded ....

Leave a comment

The comment is checked by an editor and will be released soon.

Discuss anonymously or log in Log In

Avatar
To protect our interests, we store the IP address in addition to the above information. This is solely for the purpose of identifying you as the author of the comment. The legal basis is the protection of legitimate interests in accordance with Art. 6 para. 1 lit. f) DSGVO.
  1. Avatar
    Avatar
    Edited by at
    Edited by at
    1. Avatar
      Avatar
      Edited by at
      Edited by at

Comments are being loaded ....

Report comment

Kommentar Freigeben

Der untenstehende Text wird an den Kommentator gesendet, falls dieser eine Email-hinterlegt hat.

Freigabe entfernen

Der untenstehende Text wird an den Kommentator gesendet, falls dieser eine Email-hinterlegt hat.

copyright

This article is protected by copyright. You want to use it for your own purpose? Contact us via: support.vogel.de/ (ID: 43858774 / Machining Equipment )