Research & Development 12,000 holes per second with 1 µm diameter
A new generation of ultrafast process technology is on the market. Higher average laser power and greater pulse energy promise higher throughput and efficiency.
The current challenge is to develop new beam guidance and process concepts to distribute the average outputs over the workpiece surface. It is process technology that currently poses the main limitation: Laser systems with high repetition rates require scanners with speeds of up to 1,000 m/s, while laser systems with high pulse energy require new beam-splitting and shaping concepts to distribute the energy. “It’s all about how we apply the power,” said Dr. Arnold Gillner.
One option for making better use of pulse energy is the multibeam concept, which involves splitting a laser beam into many beamlets. At the Fraunhofer Institute for Laser Technology ILT, a team has been working on this technology since 2012. Since then, the experts have learned how to use diffractive optical elements (DOEs) for the targeted application of over 200 beamlets in micro and nano-structuring. This allows them to obtain precise results in the sub-micrometre range.
For the DOE, the team uses a structured glass surface on which light waves are bent. The surface structure is etched into the glass with extreme precision using a wet chemical technique. As a result, the DOE’s static beam distribution is much more precise and resistant than dynamic beam-shaping approach based on liquid crystal modulators. For efficient material processing, the laser beam is transformed by a DOE into a beam matrix with many parallel beamlets. Using a scanner system and f-theta optics, the parallel beamlets are then focused on the workpiece and can be moved simultaneously over the workpiece along all possible paths.
In micro-drilling, the team from Fraunhofer ILT has achieved extraordinarily high precision. With their new multibeam system, the experts in Aachen are able to create precision holes with diameters of less than one micrometre. The spacing between holes can be reduced to a few micrometres. To increase throughput, they work with a DOE that generates over 200 beamlets. This way, they have already managed to produce over 12,000 holes per second with an outlet diameter of under 1 µm.
Where is the catch?
In addition to the question as to the right process technology, another problem has reared its head over the past few years: The “cold” ablation of ultrafast lasers, whereby hardly any heat is generated in the material for single-beam processes, is a good deal trickier to execute with hugely parallelised processes. At high repetition rates, high pulse energies and short distances between holes, it becomes necessary to employ customised thermal management in order to optimise the processing strategy, as process-related zones of thermal damage may otherwise form. The scientists in Aachen have been tackling this issue with success since 2012 and have defined thermal management for multibeam processing as a key focus area for their research.
Various teams worldwide have investigated the problem by means of experiments and simulations and have developed different approaches to solving it. The Fraunhofer researchers have optimised the processes for single-hole drilling and also for multibeam processing. In these processes, the laser power deposited must not exceed a maximum value dependent on the material and the target geometry.
The outcome is a patented technology that is already capable of drilling over 12,000 holes per second with diameters of a few micrometres and all the way down into the sub-micrometre range. Thus, metallic surface filters with which certain particles can be selectively separated from each other can be economically produced, for example, water filters for multi-resistant germs or for microplastics as well as many other applications in biotechnology. The use of microfilters is also interesting for the food industry, for example, in the field of sterile filtration, i.e., when all kinds of microorganisms have to be retained. Other possible applications include the filtration of fine dust in PM classes from 10 to 1 or the mechanical separation of white and red blood cells in medical technology, to name just a few applications for microfilters.